明特海外仓

排除产品目录

美国340亿美元关税加征清单第一批排除产品目录
本表清单排除时效说明:2018.7.6~2018.12.27日期间被加征过的,可向美国申请退回加征的税费;
2018.12.28
~2019.12.28日到港美国的货物可免除加征关税。
HTS US
商品编码
美国商品描述备注 商品描述(中文版,仅供参考)
8412.21.0075 全部排除
8418.69.0120
8480.71.8045
8482.10.5044
8482.10.5048
8482.10.5052
8525.60.1010
8407.21.0080 Spark-ignition engines for marine propulsion, outboard, each rated at not less than29.83 kW but not more than 44.74 kW 船外推进用火花点火发动机,每个额定功率不低于29.83千瓦但不超过44.74千瓦
8412.21.0030 Welded hydraulic linear acting (cylinders) engines and motors, each with pistonbore of 12.7 mm or more but not over 34.6 mm, with stroke not over 11.43 m,overall length not over 15.24 m and rod diameter not over 1.219 m  焊接液压线性作用(气缸)发动机和电动机,每个发动机活塞孔为12.7毫米或以上但不超过34.6毫米,行程不超过11.43米,总长度不超过15.24米,杆直径不超过1.219
8419.90.2000 Stretchers of stainless steel, designed to move rollers to adjust tension of paperfabric to be dried, each with a pivoting arm with an actuator, linear rail movementwith an actuator, and front and back units with mounting holes for tube roll bearinghousings 不锈钢拉伸器,设计用于移动辊子以调节待干燥的纸巾的张力,每个都带有带有致动器的枢转臂,带有致动器的线性轨道运动,以及带有用于管辊轴承座的安装孔的前后单元
8420.10.9080 Roller machines with dies for embossing paper, manually powered 带压花纸模具的滚筒机,手动供电
8421.19.0000 Salad spinners of plastics, with capacity of at least 2.4 liters but not more than 3.8liters 塑料沙拉旋转器,容量至少为2.4升但不超过3.8
8421.21.0000 Nonelectric water filtration apparatus consisting of three cylinder-shaped filtercartridges, each measuring 6.35 cm by 26.67 cm, having water storage tank andplastic tubing measuring 0.63 cm or more but not over 0.95 cm, presented withinstallation kit 无电水过滤装置,由三个圆柱形过滤器皿组成,每个过滤器容器尺寸为6.35厘米×26.67厘米,有储水箱和塑料管,尺寸为0.63厘米或以上但不超过0.95厘米,安装在安装套件内
8425.39.0100 Winches, each having a winch frame with a corrosion resistant coating and stainlesssteel mandrel with nylon bushings, operated manually by a worm gear mechanism 绞车,每个都有一个带有耐腐蚀涂层的绞车框架和带有尼龙衬套的不锈钢心轴,由蜗轮机构手动操作
8428.32.0000 Elevators, comprising L-shaped steel buckets bolted to a steel chain, with guiderollers and a drive system  电梯,包括用螺栓固定在钢链上的L形钢桶,带有导向器和驱动系统
8428.33.0000 Belt conveyors, each comprising a frame with leveling feet, electric motor and foodgrade plastic conveyor belt
Belt conveyors, each comprising a welded frame with leveling feet and casters,electric motor and food grade plastic modular conveyor belt
皮带输送机,每个都包括一个带调平脚的框架,电动机和foodgrade塑料输送带;
皮带输送机,每个都包括带调平脚和脚轮的焊接框架,电动机和食品级塑料模块化输送带
8439.99.1000 Guards of stainless steel, designed to shield operators of papermaking machinesfrom moving or rotating equipment, each with dimensions ranging from 30 cm by30 cm by 50 cm to 50 cm by 50 cm by 4 m, weighing 30 kg or more but not over 100kg
Scrapers ("doctors") of stainless steel, designed to scrape impurities from therotating roll surface of the forming and press sections of papermaking machines,each comprising a beam with a blade of non-symmetrical cross section, long aspectratio, and mounting journals and turning devices on either end, with dimensionsranging from 50 cm by 50 cm by 8 m to 60 cm by 6 m by 11 m, weighing 1 metric ton or more but not over 3 metric tons

Frameworks of the forming and press section of papermaking machines, of stainless steel or cladded mild steel with stainless or acid proof steel, each with dimensions ranging from 1 m by 1 m by 1 m to 2.3 m by 2.3 m by 12 m, weighing 500 kg or more but not over 40 metric tons

Guides of stainless steel, designed for locating conveyer belts on papermakingmachines, each with a moving arm with an actuator and front and back units withmounting holes for tube roll bearing houses, each with dimensions ranging from 40 cm by 50 cm by 30 cm to 1 m by 1 m by 50 cm, weighing 300 kg or more but notover 500 kg

Rollers of steel and cast iron ("nip rollers") with bearing journals on either end,designed for use in paper manufacturing to mechanically compress paper web toremove water or impart desired mechanical properties in paper web, each with apolymer cover, the foregoing with length of 7 m or more but not over 12 m, withdiameter of 1 m or more but not over 1.5 m, weighing 15 metric tons or more butnot over 30 metric tons

Open containers ("savealls") of stainless steel, designed to catch water run offgenerated in the papermaking process, constructed of large square shaped platesand flat constructions with mounting holes on ends, each with dimensions rangingfrom 50 cm by 50 cm by 50 cm to 1.5 m by 1 m by 10 m, weighing 50 kg or more but not over 2 metric tons

Stretchers of stainless steel, designed to move rollers of papermaking machines toadjust tension of fabric, each with a pivoting arm with an actuator, linear railmovement with an actuator and front and back units with mounting holes for tuberoll bearing housings

Suction boxes of stainless steel, which remove water from paper web orpapermaking fabrics during papermaking, each with dimensions ranging from 50 cmby 50 cm by 8 m to 1 m by 1 m by 10 m, weighing 1.5 metric tons or more but notover 2 metric tons

Rollers of stainless steel or cast iron, designed for use in paper manufacturing tosupport and convey papermaking cloth (i.e. fabric) or the paper web, each weighing7 metric tons or more but not over 20 metric tons, measuring 7 m or more but notover 12 m in length, with diameter of 40 cm or more but not over 1.5 m, presentedwith bearing journals on either end and a polymer cover  
不锈钢防护装置,用于保护造纸机操作员不受移动或旋转设备的影响,每个设备的尺寸范围为30厘米×30厘米×50厘米至50厘米×50厘米×4米,重量不超过30千克但未超过100公斤;
医生不锈钢刮刀,用于刮除造纸机成型和压榨部分的旋转辊表面的杂质,每个部分包括一个带有非对称横截面的刀片,长纵横比和安装轴颈的梁两端的转向装置,尺寸为50厘米×50厘米×8×60厘米×6×11米,重量为1公吨或以上但不超过3公吨;
造纸机成型和压榨部的框架,不锈钢或带不锈钢或耐酸钢的低碳钢,每个尺寸范围为1×1×1米至2.3×2.3×12米重500公斤或以上但不超过40公吨;
不锈钢导轨,设计用于在造纸机上定位输送带,每个导轨带有一个带执行器的移动臂和前后单元,带有用于管辊轴承座的安装孔,每个尺寸范围为40厘米×50厘米×30厘米到1米乘1米乘50厘米,重300千克或以上但不超过500千克;
钢和铸铁滚轮(夹辊),两端带有轴承轴颈,设计用于造纸,机械压缩纸幅以去除水或在纸幅中赋予所需的机械性能,每个都带有聚合物盖,前述长度为7米或以上但不超过12米,直径为1米或以上但不超过1.5米,重量为15公吨或以上但不超过30公吨;
不锈钢开口容器,用于捕获造纸过程中产生的水,由大方形板和扁平结构构成,两端有安装孔,每个尺寸范围为50厘米×50厘米×50厘米至1.5×1×10米,重量50公斤或以上但不超过2公吨;
不锈钢拉伸器,设计用于移动造纸机的辊子以调节织物的张力,每个都带有带执行器的枢转臂,带有执行器的线性轨道运动以及带有用于结构轴承座的安装孔的前后单元;
不锈钢吸水箱,用于在造纸过程中从纸幅或造纸织物上除去水,每个吸水箱的尺寸范围为50厘米50厘米×8米至1×1×10米,重量为1.5公吨或更多但是2公吨;
不锈钢或铸铁的滚轮,设计用于纸张制造,用于支撑和输送造纸布(即织物)或纸幅,每个重7吨或更多但不超过20公吨,尺寸为7米或更长长度为12米,直径为40厘米或更大但不超过1.5米,两端带有轴承轴颈和聚合物盖
8466.92.5010 Workstands designed to use with miter saws, each with metal tube frame, 4 metallegs and 2 metal extension arms
Workstands designed for use with miter saws, each with wheels to make workstandmobile and with sides that fold up to extend the work area
工作台设计用于斜切锯,每个斜切锯带有金属管架,4个金属腿和2个金属伸展臂;
工作台设计用于斜切锯,每个斜切锯都带有轮子,可以使工作台移动,并且侧面可以折叠以扩展工作区域
8481.90.9040 Angle cock handle assemblies, of iron and steel, each measuring 11.43 cm by 21.59cm by 5.08 cm and weighing 0.748 kg 角钢旋臂手柄组件,铁和钢,每个尺寸为11.43厘米×21.59厘米×5.08厘米,重0.748千克
9022.14.0000 Radiation therapy systems, each encased by steel-based structural shell with gantrycover comprising three pairs of plastics-based panels 放射治疗系统,每个系统均由钢基结构外壳包裹,其中包括三对塑料面板
9032.10.0030 Thermostats designed for air conditioning or heating systems, not designed to connect to the internet, the foregoing designed for wall mounting
Thermostats designed for air conditioning or heating systems, not designed toconnect to the internet, the foregoing designed for wall mounting
设计用于空调或加热系统的恒温器,不设计用于连接互联网,前述设计用于墙壁安装;
设计用于空调或供暖系统的恒温器,未设计用于连接互联网,前述设计用于墙壁安装
美国340亿美元关税加征清单第二批排除产品目录
本表清单排除时效说明:2018.7.6~2019.3.24日期间被加征过的,可向美国申请退回加征的税费;
2019.3.25
~2020.3.25日到港美国的货物可免除加征关税
HTS US
商品编码
美国商品描述备注 商品描述(中文版,仅供参考)
8412.21.0045 全部排除
8430.31.0040
8607.21.1000
8413.70.2004 Submersible centrifugal pumps, each powered by 36 V motor 潜水离心泵,每台由36 V电机供电
8413.81.0040 Breast pumps, whether or not with accessories or batteries 吸乳器,不论是否带有配件或电池
8413.91.9095 Impeller housings of cast iron
Impellers of plastic designed for centrifugal pumps, each of the foregoing with outside diameter of 73 mm or more but not more than 74 mm
铸铁叶轮外壳;
为离心泵设计的塑料叶轮,上述每根外径为73毫米或以上但不超过74毫米
8413.91.9080
8414.90.4165 Compressor housings designed for turbochargers  为涡轮增压器设计的压缩机壳体
8421.19.0000 Salad spinners, of plastics, not electrically powered 塑料沙拉旋转器,非电动
8421.21.0000 Machinery for filtering water, submersible, powered by batteries, manually operated, such machinery designed for use in pools, basins, aquariums, spas or similar contained bodies of water
Machinery designed for removing waste from water in saltwater aquariums by injecting air bubbles then filtering such bubbles

Electronic water oxidizers designed for purifying water for household washing machines

Hand-held ultraviolet water purifiers, powered by batteries
过滤水,潜水器,电池供电,手动操作的机器,设计用于游泳池,水池,水族馆,水疗池或类似水体;
设计用于通过注入气泡然后过滤这些气泡来清除海水水族箱中的废水的机器;
用于净化家用洗衣机水的电子水氧化器;
由电池供电的手持式紫外线净水器
8421.22.0000 Filters designed to remove sulfites from win 用于去除葡萄酒中亚硫酸盐的过滤器
8421.99.0040 Filter housings, covers, or couplings, the foregoing of steel and comprising parts of machinery or apparatus for filtering liquids 过滤器外壳,盖子或联轴器,上述钢材,包括用于过滤液体的机器或设备部件
8428.32.0000 Steel L-shaped bucket elevators, each comprising steel buckets bolted to a steel chain with guide wires and drive system 钢制L形斗式提升机,每个都包括用螺栓固定在钢链上的钢制支架,带有导丝和驱动系统
8431.49.9095 Vulcanized rubber tracks, each incorporating cords and cleats of steel, designed for use on construction equipment 硫化橡胶履带,每根都包含钢丝绳和夹板,设计用于建筑设备
8439.91.9000 Rotors designed to agitate paper and water into pulp, of stainless steel, the foregoing comprising parts of machinery for making pulp of fibrous cellulosic materials 设计用于将纸和水搅拌成不锈钢纸浆的转子,前述包括用于制造纤维状纤维素材料纸浆的机器部件
8471.70.6000 Automated data processing storage units (other than magnetic disk drive units), not assembled in cabinets for placing on a table or similar place, not presented with any other unit of a system 自动数据处理存储单元(磁盘驱动器单元除外),未组装在机柜中放置在桌子或类似场所,未与系统的任何其他单元一起提供
8479.10.0060 Bituminous pavers, self-propelled, each with a weight exceeding 14.9 metric tons but not exceeding 18.2 metric tons, with working width of 2.4 m or more but not over 8.6 m  自行式沥青摊铺机,每个摊铺机的重量超过14.9公吨但不超过18.2公吨,工作宽度为2.4米或以上但不超过8.6
8481.30.9000 Check valves, of acrylonitrile butadiene styrene (ABS),each weighing 120 g or less
Check valves, of plastics
丙烯腈 - 丁二烯 - 苯乙烯(ABS)止回阀,每个重120克或以下;
塑料止回阀
8501.10.4020 Electric motors, AC, permanent split capacitor type, each in a housing with outside diameter of 84 mm or less, with output of 6 W or more but not exceeding 16 W  电动机,交流电,永久分离电容器型,每个都在外径为84毫米或以下的外壳中,输出功率为6瓦或以上但不超过16
8501.31.5000 DC motors rated at 739.6 W, each with a housing with external diameter of 85 mm or more but not exceeding 90 mm and weight of 257 g or less  额定功率为739.6 W的直流电机,每个外壳的外径为85 mm或以上但不超过90 mm,重量为257 g或以下
8504.32.0000 Electrical transformers, each with a power handling capacity rating of 1.8 kVA, with external dimensions measuring approximately 13.3 cm by 12.7 cm by 11.4 cm 电力变压器,每个的功率处理能力等级为1.8千伏安,外部尺寸约为13.3厘米×12.7厘米×11.4厘米
8515.11.0000 Battery powered soldering irons or soldering guns, not over 18 cm in length 电池供电的烙铁或焊枪,长度不超过18厘米
8538.90.6000 Knobs of injection molded plastics 注塑塑料旋钮
8539.90.0000 Molybdenum foil filament assemblies, designed for use in ultraviolet lamps 设计用于紫外线灯的钼箔灯丝组件
9013.80.7000 Thin-film-transistor, light-emitting diode (LED) backlit flat panel liquid crystal display modules, each with an aluminum bezel and a video display diagonal measuring 113 mm or more but not over 339 mm 薄膜晶体管,发光二极管(LED)背光平板液晶显示模块,每个都带有铝质边框和113毫米或以上但不超过339毫米的视频显示对角线
9014.80.2000 Depth-sounding apparatus with digital display, each designed for installation in a 63.5 mm hole in dashboard, designed for recreational boating use 具有数字显示功能的深度测量设备,每个设计用于安装在仪表板的63.5 mm孔中,设计用于休闲划船用途
9018.90.7580 Restraint packs designed for use with chest compressors, each containing one torso restraint, consisting of a cotton strap which fastens with hook and loop fasteners to the compressor, and one cover for a head stabilizer 设计用于胸部压缩机的约束包,每个包含一个躯干约束装置,包括一个用钩环紧固件固定在压缩机上的棉带和一个用于头部稳定器的盖子
9027.90.5650 Inoculator sets of plastics, each consisting of a plate with multiple wells, a display tray, and a lid; when assembled, the set measuring 105 mm or more but not exceeding 108 mm in width, 138 mm or more but not exceeding 140 mm in depth, and 6.5 mm or less in thickness  接种器塑料组,每个塑料组由一个带有多个孔的板,一个展示托盘和一个盖子组成; 组装时,该组件的宽度为105毫米或以上但不超过108毫米,深度为138毫米或以上但不超过140毫米,厚度为6.5毫米或以下
9031.80.8085 Tuners designed to clip onto musical instruments and indicate whether the instrument is in tune 调音器设计用于夹在乐器上并指示乐器是否合格
美国340亿美元关税加征清单第三批排除产品目录
本表清单排除时效说明:2018.7.6~2019.4.17日期间被加征过的,可向美国申请退回加征的税费;
2019.4.18
~2020.4.18日到港美国的货物可免除加征关税。
HTS US
商品编码
美国商品描述备注 商品描述(中文版,仅供参考)
8413.19.0000 Pumps designed for countertop appliances for serving beer, the foregoing that control the level of carbonation by means of sonic waves 为供应啤酒的台面装置而设计的、通过声波控制碳化程度的泵
8420.10.9080 Roller machines designed for cutting, etching or embossing paper, foil or fabric, manually powered  设计用于剪切、蚀刻或压纹纸、箔或手动供电的织物
8421.21.0000 Water oxidizers and chlorinators 水氧化剂和加氯器
8425.39.0100 Ratchet winches designed for use with textile fabric strapping 设计用于织物捆扎的棘轮绞车
8428.33.0000 Continuous action elevators and conveyors, designed to convey mineral materials 为输送矿物而设计的连续式提升机和输送机
8431.20.0000 Counterweight castings of iron or steel designed for use on fork lift and other works trucks 设计用于叉车和其他载货汽车的钢铁对重铸件
Tines, carriages, and other goods handling apparatus and parts designed for use on fork lift and other works trucks  设计用于叉车和其他载货汽车的耙齿、车厢和其他货物装卸设备及部件
8466.93.9885 Parts of drill sharpening machines 磨刀机零件
8479.90.9496 Outer shells of hydraulic accumulators, of iron or non-alloy steel, cylindrical with hemispherical heads on each end 液压蓄能器的外壳,由铁或非合金钢制成,两端带半球形头的圆柱形
Parts of mechanical awnings and shades 机械遮篷和遮阳帘的部分
Reject doors, pin protectors, liners, front walls,grates,hammers, rotor and end disc caps, and anvil and breaker bars, of iron or steel, the foregoing parts of metal shredders 铁或钢制的拒收门、销保护器、衬垫、前壁、格栅、锤子、转子和端盘盖、砧杆和破碎杆,以及金属粉碎机的上述部分
Steering wheels designed for watercraft, of stainless steel, having a wheel diameter exceeding 27 em but not exceeding 78 em  为船艇设计的、车轮直径超过27em但不超过78em的不锈钢制方向盘
8481.10.0090 Pressure regulators of brass or bronze, whether high or low inlet type, having a rated flow rate of 55,000 - 150,000 BTU/hr, maximum inlet pressure of 0.17 MPa to 1.72 MPa, inlet connection with POL or thread type of fitting 黄铜或青铜压力调节器,无论是高进口型还是低进口型,额定流量为55000-150000 BTU/hr,最大进口压力为0.17 MPa1.72 MPa,带POL或螺纹接头的入口连接
8481.90.9040 Pipe brackets of aluminum, each with 4 ports, the foregoing measuring 27.9 em x 20.3 em x 17.8 em and weighing 11.34 kg, designed for installation into air brake control valves 铝制管支架,每个管支架有4个端口,上述尺寸为27.9 em x 20.3 em x 17.8 em,重量为11.34 kg,设计用于安装到空气制动控制阀中
Push pins and C-poles of steel, designed for use in variable force solenoid valves 设计用于可变作用力电磁阀的钢制推杆和C形杆
8482.10.5032 Ball bearings of a width not exceeding 30 mm 宽度不超过30 mm的滚珠轴承
8504.90.9690 Inductor baseplates of aluminum, each with a length measuring 149.20 mm or more but not over 275 mm, with a width measuring 119.40 mm or more but not over 232 mm and with a depth of 10.50 mm or more but not over 19 mm,with a weight of0.48 kg or more but not over 3.2 kg 铝制电感器底板,长度为149.20 mm或大于等于275 mm,宽度为119.40 mm或以上,但不超过232 mm,深度为10.50 mm或以上,但不超过19 mm,重量为0.48 kg或以上,但不超过3.2 kg
8515.90.4000 Parts of soldering irons and soldering machines 烙铁和焊接机的零件
8536.50.9065 Motor vehicle gear shift switch assemblies, comprised of a plunger, connector and gear shift lever 机动车辆换档开关总成,包括柱塞、连接器和换档杆
Pressure switches designed for use in heat pumps and air-conditioning
condensers having a rating of 1.90 megapascals or more but not over 4.55 megapascals
为热泵和空调冷凝器设计的压力开关,额定值为1.90兆帕或以上但不超过4.55兆帕
9030.33.3800 Instruments for measuring or checking voltage or electrical connections;electrical circuit tracers 测量、检查电压或者电气连接的仪器;电路跟踪器
美国340亿美元关税加征清单第四批排除产品目录
本表清单排除时效说明:2018.7.6~2019.5.13日期间被加征过的,可向美国申请退回加征的税费;
2019.5.14
~2020.5.14日到港美国的货物可免除加征关税
HTS US
商品编码
美国商品描述备注 商品描述(中文版,仅供参考)
8407.21.0040 全部排除
8427.10.4000
8473.40.1000
8481.10.0090
8483.50.9040
8421.21.0000 Apparatus, including pitchers, bottles, and units designed for incorporation into refrigerators, appliances or sink faucets, the foregoing fitted with filters for filtering or purifying water 装置,包括水罐、瓶子和设计用于冰箱、器具或水槽水龙头的装置,上述装置配有过滤或净化水的过滤器
Filtering apparatus, fitted with pumps, designed for use in pools, spas or similar contained bodies of water 过滤装置,装有泵,设计用于水池、水疗或类似的含水体
Filtering or purifying machinery or apparatus of a kind used for waste water treatment 用于废水处理的过滤或净化机械或装置
Submersible machinery for filtering water, designed for use in pools, basins, aquariums, spas or similar contained bodies of water 设计用于水池、水池、水族馆、水疗或类似含水体的过滤水的潜水机械
Water distillation machinery and apparatus not covered by heading 8419 8419品目未包括的水蒸馏机械和设备
8421.39.8015 Air purification equipment, electrically powered, weighing less than 36 kg 电动空气净化设备,重量36公斤以下
Dust collection equipment for cement, minerals and mining industries 水泥、矿产和采矿业用除尘设备
8428.39.0000 Apron-type chain conveyor 板式链式输送机
Roller conveyors 滚筒式输送机
Vibrating conveyors 振动输送机
8438.80.0000 Machinery for mixing beverages in single servings for direct human consumption, designed for use in commercial food service establishments 为商业食品服务机构设计的将饮料混合成单一份供人直接饮用的机器
Machinery for reconstituting single serving beverages for direct human consumption from frozen pre-packaged portions, designed for use in commercial food service establishments 设计用于商业食品服务机构的冷冻预包装部分直接供人食用的单一服务饮料再造机械
8481.90.9040 Armatures designed for use in hydraulic solenoid valves 液压电磁阀用电枢
C-poles, of steel, designed for use in hydraulic solenoid control valves C极钢制,设计用于液压电磁控制阀
Housings designed for hydraulic ball valves, of cast iron or steel, each measuring 5.7 cm by 3.2 cm and weighing 0.528 kg 设计用于液压球阀的外壳,铸铁或钢制,每个尺寸为5.7 cm×3.2 cm,重量为0.528 kg
Metering spools, of aluminum, designed for use in hydraulic solenoid control valves 铝制计量线轴,设计用于液压电磁控制阀
Metering spools, of steel, designed for use in hydraulic solenoid control valves 液压电磁控制阀用钢制计量线轴
Poles, of steel, designed for use in hydraulic solenoid control valves 设计用于液压电磁控制阀的钢制电杆
Push pins, of steel, designed for use in hydraulic solenoid control valves 液压电磁控制阀用钢制推杆
Retainers, of steel, designed for use in hydraulic solenoid control valves 液压电磁控制阀用钢制夹持器
8501.10.4060 DC electric motors, of an output of less than 18.65 W, valued over $4, other than brushless 直流电动机,输出功率小于18.65W,价值超过4美元,无刷者除外
8501.52.8040 AC electric motors, multi-phase, of an output exceeding 14.92 kW but not exceeding 75 kW, other than for use in civil aircraft 输出功率超过14.92千瓦但不超过75千瓦的多相交流电动机,民用航空器除外
8505.90.7501 Coils, coil assemblies and other parts of electromagnets 电磁铁线圈、线圈组件和其他零件
8526.92.5000 Radio remote control apparatus for garage doors 车库门无线电遥控装置
Radio remote control apparatus for pet collars and pet food dispensers 用于宠物项圈和宠物食品分配器的无线电遥控装置
Remote control devices, hand held and battery powered, designed for use with toy model vehicles and aircraft 手提式和电池驱动的遥控装置,设计用于玩具模型车辆和飞机
8529.90.8100 Bezels, covers and housings, the foregoing designed for motor vehicle cameras 嵌框、盖和外壳,上述设计用于机动车摄像头
8536.49.0075 Electromechanical relays, for a voltage exceeding 60 V but not over 250 V, with contacts rated at 10 A or more 机电式继电器,电压超过60伏但不超过250伏,触点额定值为10安或以上
8536.50.9035 Push-button switches, rated at over 5 A, measuring no more than 2.9 cm by 2.9 cm by 2.9 cm, with 4 spade or brass terminals, with an actuator shaft with D-shaped cross section 按钮开关,额定电流大于5 A,测量值不超过2.9 cm x 2.9 cm x 2.9 cm,带4个铲形或黄铜端子,带一个D形截面的执行机构轴
Push-button switches, rated at over 5 A, measuring no more than 4.8 cm by 2.8 cm by 2.8 cm, with 2 spade or brass terminals 按钮开关,额定电流大于5 A,测量值不超过4.8 cm x 2.8 cm x 2.8 cm,带2个铁锹或黄铜端子
Push-button switches, rated at over 5 A, measuring no more than 5 cm by 1.7 cm by 1.9 cm, with 2 spade or brass terminals, with an actuator shaft with D-shaped cross section 按钮开关,额定电流大于5 A,测量值不超过5 cm×1.7 cm×1.9 cm,带2个铲形或黄铜端子,带一个D形截面的执行机构轴
8536.50.9040 Snap-action switches, each designed for installation in a wall-mounted enclosure or electrical box 速动开关,每个设计用于安装在壁挂式外壳或电气箱中
9011.10.8000 Stereoscopic microscopes, not provided with a means for photographing the image, valued not over $500 per unit 立体显微镜,未提供照相手段,每单位价值不超过500美元
9011.90.0000 Adapter rings, tubes and extension sleeves, stands and arm assemblies, stages and gliding tables, eyeguards and focusing racks, all the foregoing designed for use with compound optical microscopes 适配器环、管子和延伸套管、支架和臂组件、舞台和滑动台、护目镜和聚焦架,上述所有设计均用于复合光学显微镜
9018.20.0040 Ultraviolet or infrared LED light therapy devices for the professional treatment of pain or of ailments of the skin 用于专业治疗皮肤疼痛或疾病的紫外线或红外线LED光治疗设备
美国340亿美元关税加征清单第五批排除产品目录
本表清单排除时效说明:2018.7.6~2019.6.3日期间被加征过的,可向美国申请退回加征的税费;
2019.6.4
~2020.6.4日到港美国的货物可免除加征关税
HTS US
商品编码
美国商品描述备注 商品描述(中文版,仅供参考)
8537.10.8000 全部排除
8411.99.9085 Parts of nonaircraft gas turbines, other than rotors, spindles, rotor assemblies, spindle assemblies or steel forgings 非航空燃气轮机零件,但转子、主轴、转子组件、主轴组件或钢锻件除外
8413.50.0010 Oil well and oil field crank-balanced, long-stroke and beam pumps 油井和油田曲柄平衡、长冲程和游梁泵
8413.50.0070 Radial piston hydraulic fluid pumps weighing not over 500 grams 重量不超过500克的径向活塞液压泵
8413.70.2004 Centrifugal pumps, submersible, designed for use in apparatus for supplying water to pets 潜水离心泵,设计用于向宠物供水的装置
Centrifugal pumps, submersible, other than for use with machines for making cellulosic pulp, paper or paperboard; the foregoing pumps rated not over 1.5 kW 潜水离心泵,不与纤维素纸浆、纸或纸板制造机一起使用;上述泵额定功率不超过1.5千瓦
Submersible dual port pump designed for use in swimming pools 游泳池用潜水双口泵
Submersible pump designed for use in aquariums, not over 325 mm tall 设计用于水族馆的潜水泵,高度不超过325mm
Submersible pump incorporating a magnetic drive motor 带有磁力驱动电机的潜水泵
Submersible pumps, rated not over 1 horsepower, designed for use in pumping raw sewage 潜水泵,额定功率不超过1马力,设计用于抽取未经处理的污水
Sump pumps, submersible, rated not over 1 horsepower, activated by float switch 潜水集水坑泵,额定功率不超过1马力,由浮球开关启动
8413.70.2005 Centrifugal pumps, not for use with machines for making cellulosic pulp, paper or paperboard, not submersible, the foregoing single-stage, single-suction, close-coupled and with discharge outlet under 5.1 cm in diameter 离心泵,不与用于制造纤维素纸浆、纸或纸板的机器一起使用,不可潜水,上述单级、单吸、紧密耦合和直径小于5.1 cm的排放口
8413.70.2090 Centrifugal pumps designed for eliminating condensate, the foregoing not elsewhere specified or included 为消除冷凝水而设计的离心泵,上述未另行规定或包含
8413.91.9010 Housings for water pumps of subheading 8413.30.90 8413.30.90子目的水泵外壳
Impellers for water pumps of subheading 8413.30.90 8413.30.90子目的水泵叶轮
8413.91.9060 Hydraulic pump positioning piston assemblies 液压泵定位活塞组件
Plastic reservoirs for motor vehicle brake master cylinders 汽车制动总泵塑料储液罐
8414.90.4190 Airend assemblies, inlet guide vanes, air-ends, compressor baseplates and backplates 空气轮组件、入口导叶、空气端、压缩机底板和背板
8418.69.0110 Stand-alone icemaking machines, each having a rated capacity not exceeding 160 kg per day, capable of producing ice in pieces not larger than 40 cubic cm in any dimension 独立制冰机,每台额定容量不超过每天160公斤,能以任何尺寸生产不超过40立方厘米的冰块。
8418.69.0180 Assemblies of thermo-electric modules, whether or not presented with attached heat exchangers, fans, shrouds, temperature sensors or controllers 热电模块组件,不论是否附有热交换器、风扇、覆环、温度传感器或控制器
Coolers, non-compressor, powered by 12 V DC, each with an interior volume not exceeding 17 liters 非压缩机冷却器,由12伏直流电驱动,每台内部容积不超过17
8419.19.0040 Solar water heaters incorporating glass tube heat collectors and including glass tubes and stands with tanks 包含玻璃管集热器的太阳能热水器,包括玻璃管和带水箱的支架
8419.40.0080 Distillation and rectifying equipment designed for use in the production of methylene diphenyl diisocyanate 设计用于生产亚甲基二苯基二异氰酸酯的蒸馏和精馏设备
8419.90.3000 Heat exchanger plates, cores, finned tubes, cones, shells, bonnets, flanges and baffles 换热器板、芯、鳍片管、锥、壳、阀盖、法兰和挡板
8421.99.0080 Cast steel and steel structural forms designed for use in filtering machines, such machines used in mining or manufacturing facilities 设计用于过滤机器的铸钢和钢结构模板,用于采矿或制造设施的此类机器
Parts of air filtering machines or apparatus, the foregoing of cast steel and steel 空气过滤机器或设备的零件,上述铸钢和钢制
8427.10.8090 Self-propelled fork-lift and platform trucks, each powered by an electric motor and controlled by walking operator 自行式叉车和平台式卡车,每辆由电动机驱动,由步行操作员控制
8428.90.0290 Garage door opener/closers 车库门开启器/关闭器
Hinged steel transfer machinery, designed for diverting goods from and to conveyor lines 铰链式钢输送机械,设计用于将货物从输送线转移到输送线
Rotating bench, electrically powered, designed for turning a workpiece in a production line 电动旋转工作台,设计用于在生产线上转动工件
Rotating fork machines, designed for lifting and depositing coiled steel bars in a production line 旋转叉式机器,设计用于在生产线上提升和沉积盘条
8429.40.0020 Vibratory, self-propelled tamping machines, each with drum roller 振动式自走式捣固机,每台均配有滚筒式压路机
8429.52.1010 New, track-mounted hydraulic backhoes or hydraulic shovels, each with a 360-degree revolving superstructure 新型履带式液压反铲或液压铲,每台均配有360度旋转上部结构
8430.10.0000 Pile drivers, diesel powered 柴油打桩机
8431.39.0010 Belt conveyor crossmember assemblies 带式输送机横梁组件
Conveyor roller support brackets 输送辊支架
Carriers designed for holding motor vehicles in overhead conveyors 设计用于将机动车辆固定在高架输送机中的运输车
Catenary idler stringers 悬链线托辊纵梁
Conveyor belt assemblies incorporating bearings 带轴承的传送带组件
Conveyor line pans, the foregoing parts suitable for use solely or principally with coal mine conveyors 输送机线路盘,上述部件适合单独使用或主要用于煤矿输送机
Conveyor spill plates 输送机溢油板
Welded frames designed to support conveyor rollers 设计用于支撑输送辊的焊接框架
8431.49.9010 Feed pushers, bale forks, scrapers and frames therefor 推料机、料捆叉、刮刀及其框架
8455.22.0000 Complete sheet pile rolling mills 全板桩轧机
Rolling mills designed to form 4 to 5 ribbed metal panels not exceeding 95 cm wide 设计成45个带肋金属板(宽度不超过95cm)的轧钢机
8482.10.5060 Double row ball bearings having an inner diameter exceeding 15 mm but not exceeding 32 mm, an outer diameter exceeding 38 mm but not exceeding 64 mm and a width exceeding 15 mm but not exceeding 29 mm 双列滚珠轴承,内径超过15 mm但不超过32 mm,外径超过38 mm但不超过64 mm,宽度超过15 mm但不超过29 mm
8482.40.0000 Needle roller bearings of a width not exceeding 30 mm 宽度不超过30毫米的滚针轴承
8482.99.0500 Outer bearing rings 外轴承环
8482.99.6595 Bearing shields 轴承护罩
8483.90.8010 Coupling covers, including center members, flanged hubs, sleeves and shoes 联轴器盖,包括中心构件、法兰轮毂、套筒和支座
8501.53.8040 AC multi-phase motors, each of an output exceeding 300 kW but not exceeding 310 kW, fitted with pulleys and brakes to raise and lower passenger elevators 交流多相电动机,每相输出功率超过300千瓦,但不超过310千瓦,装有滑轮及制动器,用以升降客梯
8504.40.4000 Regenerative speed drive controllers for controlling speed of electric motors for elevators 用于控制电梯电机速度的再生式速度驱动控制器
Variable frequency drive controllers for electric motors, each weighing more than 1 kg but not more than 11 kg 电机变频驱动控制器,每台重量超过1 kg但不超过11 kg
8404.40.4000 Speed drive controllers for electric motors, each such controller measuring 100 mm or more but not over 130 mm in length, 40 mm or more but not over 125 mm in width and 24 mm or more but not over 85 mm in height 电动机的速度驱动控制器,每个控制器的长度为100 mm或以上但不超过130 mm,宽度为40 mm或以上但不超过125 mm,高度为24 mm或以上但不超过85 mm
8504.40.0000 Speed drive controllers for electric motors, the foregoing operating at 250 A or more but not over 500 A 电机的速度驱动控制器,上述控制器在250 A或以上但不超过500 A的条件下运行
8504.90.6500 Printed circuit assemblies of the goods of subheading 8504.40 or 8504.50 for telecommunication apparatus, each measuring 4 cm to 6 cm in width and 10 cm to 12 cm in length, that converts 36 V DC to 90 V AC 电信设备用第8504.408504.50子目的货物的印刷电路组件,每个宽度为4 cm6 cm,长度为10 cm至12 cm,可将36 V dc转换为90 V ac
Printed circuit assemblies of the goods of subheading 8504.40 or 8504.50 for telecommunication apparatus, each measuring 7 cm to 9 cm in width and 18 cm to 20 cm in length, having 2 switches, for power protection to prevent electrical back feeding 电信设备用第8504.408504.50子目的货物的印刷电路组件,每个组件的宽度为7 cm9 cm,长度为18 cm20 cm,具有2个开关,用于电源保护,以防止电反馈
Printed circuit assemblies of the goods of subheading 8504.40 or 8504.50 for telecommunication apparatus, the foregoing serving as controllers for power supplies, each measuring 5 cm to 7 cm in width and 11 cm to 14 cm in length, having 50 pin on side header 用于电信设备的第8504.408504.50子目的货物的印刷电路组件,上述组件用作电源控制器,每个宽度为5 cm7 cm,长度为11 cm14 cm,侧标题上有50
Printed circuit assemblies of the goods of subheading 8504.40 or 8504.50 for telecommunication apparatus, the foregoing serving as noise filters, each measuring 18 cm to 20 cm in width and 25 cm to 27 cm in length, populated with semiconductor devices and 4 heat sinks 用于电信设备的第8504.408504.50子目的货物的印刷电路组件,上述组件用作噪声滤波器,每个宽度为18 cm20 cm,长度为25 cm27 cm,填充半导体器件和4个散热器
8525.60.1050 Radio transceivers operating on frequencies from 46 MHz to 468 MHz, each designed for installation in motor vehicles 46兆赫至468兆赫频率范围内工作的无线电收发器,每个收发器设计用于安装在机动车辆上
8529.10.4040 Antennas, of base metal and fiberglass 天线,贱金属和玻璃纤维
8529.90.9900 Projector parts 投影仪零件
8536.41.0050 Electromechanical relays, for a voltage not exceeding 24 V, other than automotive flashers, with contacts rated at 10 A or more, measuring not over 80 mm in any dimension 机电式继电器,电压不超过24 V,除汽车闪光器外,触点额定值在10 A或以上,任何尺寸的测量值均不超过80 mm
8536.50.9035 Push-button switches, rated at over 5 A, measuring no more than 14.4 cm by 11.6 cm by 6.4 cm 按钮开关,额定电流大于5 A,测量值不超过14.4 cm x 11.6 cm x 6.4 cm
Push-button switches, rated at over 5 A, measuring no more than 14.6 cm by 8 cm by 14.1 cm 按钮开关,额定电流大于5 A,测量值不超过14.6 cm8 cm14.1 cm
Push-button switches, rated at over 5 A, measuring no more than 19.1 cm by 8.3 cm by 14.1 cm 按钮开关,额定电流大于5 A,测量值不超过19.1 cm x 8.3 cm x 14.1 cm
Push-button switches, rated at over 5 A, measuring no more than 19.7 cm by 11.8 cm by 8.3 cm 按钮开关,额定电流大于5 A,测量值不超过19.7 cm x 11.8 cm x 8.3 cm
Push-button switches, rated at over 5 A, measuring no more than 19.7 cm by 9.8 cm by 16.5 cm 按钮开关,额定电流大于5 A,测量值不超过19.7 cm x 9.8 cm x 16.5 cm
Push-button switches, rated at over 5 A, measuring no more than 21 cm by 13.3 cm by 9 cm 按钮开关,额定电流大于5 A,测量值不超过21 cm×13.3 cm×9 cm
Push-button switches, rated at over 5 A, measuring no more than 23.5 cm by 8 cm by 13.1 cm 按钮开关,额定电流大于5 A,测量值不超过23.5 cm8 cm13.1 cm
Push-button switches, rated at over 5 A, measuring no more than 6 cm by 14.1 cm by 11 cm 按钮开关,额定电流大于5 A,测量值不超过6 cm x 14.1 cm x 11 cm
8536.50.9065 Push-pull switches, for a voltage not exceeding 1,000 V, designed for use in motor vehicles 电动车辆用电压不超过1000V的推拉开关
8536.90.4000 Bullet connectors, for a voltage not exceeding 1,000 V 弹头连接器,电压不超过1000 V
Butt connectors, other than closed end, for a voltage not exceeding 1,000 V 电压不超过1000V的非封闭端对接连接器
Closed-end butt connectors, for a voltage not exceeding 1,000 V 封闭式对接接头,电压不超过1000 V
Crimp connectors, for a voltage not exceeding 1,000 V 压接连接器,电压不超过1000 V
Insulated tab electrical connectors and tab receptacle electrical connectors, for a voltage not exceeding 1,000 V, crimp-type, with either a tab measuring not over 6.4 mm in width or a receptacle for tabs measuring not over 6.4 mm in width 绝缘片电气连接器和接头插座电气连接器,电压不超过1000 V,压接型,带有宽度不超过6.4 mm的接头或用于测量宽度不超过6.4 mm的接头的插座
Junction blocks, for a voltage not exceeding 1,000 V 接线盒,电压不超过1000 V
Lug connectors, for a voltage not exceeding 1,000 V 接线片连接器,电压不超过1000 V
Ring connectors, for a voltage not exceeding 1,000 V 环式连接器,电压不超过1000 V
Spade connectors, for a voltage not exceeding 1,000 V 扁平接头,电压不超过1000 V
Spring clip ("alligator clip") terminals, for a voltage not exceeding 1,000 V 弹簧夹(鳄鱼夹)端子,电压不超过1000 V
Terminal blocks, for a voltage not exceeding 1,000 V 电压不超过1000 V的接线板
Wire tap connectors, for a voltage not exceeding 1,000 V 电压不超过1000伏的抽头连接器
8543.30.9040 Magnesium anodes, each not exceeding 48 kg in weight 镁阳极,每块重量不超过48公斤
9018.19.9560 Disposable self-adhesive brain monitoring sensor patches for use with an oximeter, each incorporating a circuit board, light-emitting diode (LED), photo diodes and memory device and a connector 用于血氧计的一次性自粘脑监测传感器贴片,每个都包含电路板,发光二极管(LED),光电二极管和存储设备以及连接器
Disposable stainless steel subdermal needle electrodes with accompanying harness for use with electromyography (EMG) equipment 一次性不锈钢皮下针电极,附带线束,用于肌电图(EMG)设备
Disposable surface electrodes for intra-operative neuromonitoring (“IONM”) systems, each composed of a surface electrode pad, an insulated wire, and a standard DIN 42802 connector 用于术中神经监测(“IONM”)系统的一次性表面电极,每个系统由表面电极垫,绝缘线和标准DIN 42802连接器组成
9024.10.0000 Machines for testing the hardness of metals 用于测试金属硬度的机器
美国340亿美元关税加征清单第六批排除产品目录
本表清单排除时效说明:2018.7.6~2019.7.8日期间被加征过的,可向美国申请退回加征的税费;
2019.7.9
~2020.7.9日到港美国的货物可免除加征关税
HTS US
商品编码
美国商品描述备注 商品描述(中文版,仅供参考)
8402.90.0010 Heat exchangers, the foregoing comprising parts of goods of heading 8402 and each fitted for heat recovery steam generator 热交换器,上述包括货物的一部分品目8402,每种均适用于热回收蒸汽发生器
8402.90.0090 Drums, exhaust stacks, and inlet duct panel assemblies of heat recovery steam generators 鼓,排气管和进气口管道面板组件的热量回收蒸汽发生器
Water tanks for steam or other vapor generating boilers 蒸汽或其他蒸汽锅炉用水箱
8408.90.9010 Compression-ignition engines with maximum power exceeding 50 kW but not exceeding 120 kW, each valued over $6,000 but not over $9,500 per unit 最大功率超过50千瓦但不超过120千瓦的压燃式发动机,每台价值超过6000美元但不超过9500美元
8408.90.9020 Compression-ignition engines, exceeding 149.2 kW but not exceeding 373 kW and valued over $9,800 but not over $12,000 压燃式发动机,功率超过149.2千瓦但不超过373千瓦,价值超过9800元但不超过12000
8411.99.9090 Aircraft gas turbine compressor cases of steel and Inconel alloy, each valued over $3,000 but not over $4,000 飞机燃气涡轮压缩机用钢和铬镍铁合金外壳,每个价值超过3000美元,但不超过4000美元
Engine stationary seal air supports of Inconel alloy, each measuring over 35 cm but not over 35.5 cm in outer diameter and over 3.5 cm but not over 4 cm in width 发动机静密封空气支架,采用铬镍铁合金制成,每个支架的外径超过35 cm,但不超过35.5 cm,宽度超过3.5 cm,但不超过4 cm
8412.39.0080 Direct acting and spring return pneumatic actuators, each rated at a maximum pressure of 10 bar and valued over $68 but not over $72 per unit 直动式和弹簧复位气动执行器,每个额定最大压力为10 bar,价值超过68美元但不超过72美元
8412.80.1000 Spring-operated motors, each valued over $3,000 but not over $3,600 弹簧驱动电机,每台价值超过3000美元但不超过3600美元
8413.60.0030 Gear-type hydraulic fluid power pumps, handheld, battery powered, the foregoing not over 5 cm in width and valued not over $6 per unit 齿轮式液压动力泵,手持式,电池驱动,上述泵的宽度不超过5 cm,每台价值不超过6美元
8413.70.2015 Centrifugal water pumps incorporating thermal cut-offs, each with discharge outlet 5.08 cm or more in diameter, valued over $66 but not over $72 per unit 带有热切断装置的离心式水泵,每个装有直径5.08cm或更大的排放口,价值超过66美元,但每个单元不超过72美元
8413.91.9010 Motor vehicle oil pump housings 机动车油泵壳
8413.91.9095 Impellers 叶轮
Parts of oil and gas extraction beam pumps, other than hydraulic power pumps 除液压动力泵之外的部分石油和天然气提取梁泵
Pedestals of pump assemblies 泵组件底座
Pump bases, of plastic, designed to protect the pump impellers from obstructions 塑料泵底座,用于保护泵叶轮免受障碍物的影响
Pump casings and bodies 泵壳和泵体
Pump covers 泵盖
Pump expellers 泵排出器
Pump grease cups and grease cup adapters 泵油杯和油杯适配器
Pump liners 泵衬套
Pump manifolds 泵歧管
Pump parts, of plastics, each valued not over $3 塑料泵零件,价值不超过3美元
Pump shaft castings, of steel 钢制泵轴铸件
Pump throatbushes 泵喉管
Pump volutes 泵蜗壳
Structural pump bases, of stainless steel 不锈钢结构泵座
8414.30.8030 Compressors, other than screw type, used in air conditioning equipment in motor vehicles, each valued over $88 but not over $92 per unit 机动车辆空调设备中使用的螺杆式以外的压缩机,每台价值超过88美元,但不超过92美元
8414.30.8050 Compressors, other than screw type, of a kind used in household refrigerators, air conditioners and heat pumps, rated at more than  1 ⁄ 4 horsepower but not more than 1 horsepower, each valued not over $150 家用冰箱、空调器及热泵所用之压缩机(螺杆式除外),额定功率在1/4马力以上但不超过1马力,每台价值不超过150美元
8427.20.8090 Fork-lift trucks, propane gas powered, having a rated lift capacity over 9.5 metric tons but not exceeding 33 metric tons 丙烷气动叉车,额定起重量9.5公吨以上,但不超过33公吨
8429.20.0000 Motor grader weighing more than 14 metric tons but not over 21 metric tons 重量超过14公吨但不超过21公吨的平地机
8429.40.0040 Self-propelled pneumatic compactors, each weighing over 14 metric tons but not over 28 metric tons 自行式气压压实机,每台重量超过14公吨,但不超过28公吨
8429.51.1015 New articulated shovel loaders, wheeled, each with 4-wheel drive, rear mounted engine and a bucket capacity of under 1.5 m³ , rated at not over 26 horsepower 新型轮式铰接式铲式装载机,每台装载机配有四轮驱动,后置发动机,斗容量小于1.5 m³,额定功率不超过26马力
8429.51.1040 Integrated tractor shovel loaders, each with 4 wheel drive, a bucket capacity of at least 3.8 m³ but less than 5.2 m³ and an operating weight of 17.5 metric tons or more but not over 20 metric tons 整体式拖拉机铲式装载机,每个装载机具有4轮驱动,斗容至少3.8 m³,但小于5.2 m³,工作重量为17.5公吨或以上,但不超过20公吨
8429.51.1045 Shovel loaders with an operating weight of from 30 metric tons to 36 metric tons 铲式装载机,工作重量从30公吨至36公吨
8429.51.1050 Shovel loaders with an operating weight of from 30 metric tons to 36 metric tons 铲式装载机,工作重量从30公吨至36公吨
8429.51.5010 Rubber track shovel loaders having a lift capacity not over 375 kg 橡胶履带铲装载机,提升能力不超过375千克
8431.10.0010 Grooved wire rope drum valued over $350 价值超过350美元的带槽钢丝绳卷筒
8431.31.0040 Escalator drive assemblies consisting of a motor, planetary gear and gearbox 由电动机、行星齿轮和齿轮箱组成的自动扶梯驱动组件
Escalator steps 自动扶梯台阶
8431.31.0060 Parts of passenger or freight elevators consisting of any of the following: Elevator emergency brake and speed governor apparatus, scissor lift assemblies, telescoping boom lift assemblies or articulating boom lift assemblies 乘客或货运电梯的部件包括以下任何一种:电梯紧急制动器和调速器装置,剪叉式升降机组件,伸缩臂架升降机组件或铰接臂架升降机组件
8431.39.0070 Counterweights for log handling equipment 原木装卸设备衡
8431.49.9044 Backhoe counterweights each weighing more than 400 kg but not more than 600 kg 反铲平衡重,每个重量超过400 kg,但不超过600 kg
Excavator crawler shoes 挖掘机履带板
8432.90.0060 Seeder or spreader baffle and baffle assemblies 播种机或撒布机挡板和挡板组件
Seeder or spreader frames 播种机或撒布机机架
Seeder or spreader handles 播种机或撒布机手柄
Seeder or spreader hopper assemblies 播种机或撒布机漏斗组件
Seeder or spreader hopper grates 播种机或撒布机漏斗格栅
Seeder or spreader impellers 播种机或撒布机叶轮播种机或撒布机叶轮
8436.80.0090 Chipper/shredder machines, electrically powered 削片机/碎纸机、电动装卸机/碎纸机、电动
Chipper/shredder machines, gasoline powered, valued less than $250 per unit 汽油驱动的粉碎机/碎纸机,每台价值低于250美元
Malt production equipment 麦芽生产设备
8458.19.0020 Horizontal lathes, electrically powered not over 1.5 horsepower 电动卧式车床,功率不超过1.5马力
8474.90.0010 Feeder and vibratory flow equipment and parts thereof designed for use in screening or sorting machines; housings and noise reduction enclosures; the foregoing 用于筛选或分类机器的给料机和振动流设备及其零件;外壳和降噪外壳
8479.30.0000 Press machines for bamboo or other materials of a woody nature 竹材或其他木质材料压制机
8479.81.0000 Electric wire coil-winder machines 电线绕线机
8479.82.0040 Insulated mixing chambers of stainless steel, each having a capacity of 5 m³ to 25 cubic meters 不锈钢绝缘混合室,每个容量为5 m³25立方米
8481.30.2090 Check valves of steel having an internal diameter not less than 4.8 cm or exceeding 62.5 cm 内径不小于4.8 cm或超过62.5 cm的钢制阀门
8481.90.9060 Bodies of pressure-reducing valves other than hand-operated or check valves and valves classified in 8481.20, such bodies of brass 8481.20中分类的手动或止回阀和阀门以外的减压阀体,这种黄铜阀体
Bodies of valves other than hand- operated or check valves and valves classified in 8481.20, such bodies measuring over 18 cm but not exceeding 19 cm in length, valued over $55 but not over $65 per unit 除手动或止回阀和阀门以外的阀门,分类为8481.20,这种阀体长度超过18厘米但长度不超过19厘米,价值超过55美元,但每单位不超过65美元
8482.10.5016 Flanged wheel hub bearing units with ball bearings, each having an inner diameter exceeding 2.2 cm but not exceeding 2.8 cm 带滚珠轴承的法兰轮毂轴承单元,每个轴承的内径超过2.2 cm,但不超过2.8 cm
8482.10.5024 Wheel hub angular contact bearing units, not flanged, valued over $2 but not over $10 per unit 轮毂角接触轴承单元,非法兰式,每单元价值超过2美元但不超过10美元
8482.99.0500 Inner bearing rings 内轴承环
8483.40.9000 Non-toothed gears for office printers, each valued not over $7 办公打印机用无齿齿轮,每种价值不超过7美元
8483.50.9080 Non-grooved pulleys, each incorporating a deep groove roller bearing 无槽滑轮,每个滑轮包含一个深槽滚子轴承
Non-grooved pulleys, zinc plated, each valued not over $3 镀锌无槽滑轮,每只价值不超过3美元
Hubs for conveyor pulleys with an outside diameter of more than 5 cm but not more than 56 cm  外径大于5 cm但不大于56 cm的传送带轮轮毂
Handles for machinery 机械手柄
8501.10.4060 Electric motors of a width exceeding 7.5 cm but not exceeding 7.8 cm 宽度超过7.5厘米但不超过7.8厘米的电动机
8501.31.200 DC motors, each valued over $125, with attached stranded copper cord 直流电机,每台价值超过125美元,附带铜绞线
8501.53.4080 AC motors, multi-phase, each of an output exceeding 75 kW but less than 149.2 kW 多相交流电动机,每相输出功率超过75千瓦但小于149.2千瓦
8501.62.0000 AC generators, each weighing over 250 kg but not more than 1 metric ton and valued not over $2,400 交流发电机,每台重量超过250公斤但不超过1公吨,价值不超过2400美元
8504.33.0020 Transformers designed to control horizontal motion of electron beams in cathode-ray tubes 用于控制阴极射线管中电子束水平运动的变压器
8504.90.9650 Static converter covers, bases and housings 静态转换器盖、底座和外壳
8514.90.8000 Furnace casings 炉壳
Structural components for industrial furnaces  工业炉的结构部件
8515.19.0000 Manually operated rework stations, including soldering/desoldering stations 手工操作的返修站,包括焊接/脱焊站
8515.39.0020 Machines and apparatus for arc (including plasma arc) welding, each valued not over $500 电弧(包括等离子弧)焊接用机器和设备,每台价值不超过500美元
8525.60.1030 Hand-held transceivers (except Citizen’s Band and except low-power radiotelephonic operating on frequencies from 49.82 MHz to49.90 MHz), valued not over $70 each 手持式收发器(公民波段和在49.82兆赫至49.90兆赫频率范围内工作的低功率无线电话除外),每个价值不超过70美元
8532.10.0000 Fixed capacitors valued not over $4 per unit 每单位价值不超过4美元的固定电容器
Fixed oil-filled capacitors rated at 1 kV to 25 kV 额定电压为1千伏至25千伏的充油固定电容器
8532.21.0050 Tantalum capacitors having a conductive polymer cathode, valued not over $4 per unit 具有导电聚合物阴极的钽电容器,每单位价值不超过4美元
Tantalum capacitors, each measuring 7.3 mm by 4.3 mm by 1.9 mm and valued not over $4 钽电容器,每个容量为7.3 mm×4.3 mm×1.9 mm,价值不超过4美元
8532.22.0085 Aluminum electrolytic capacitors, each valued not over $2.50 铝电解电容器,每台价值不超过2.50美元
8536.41.0045 Contactors, for a voltage not exceeding 60 V and with contacts rated at or more than 10 A, each valued not over $18 电压不超过60V且触点额定值为或大于10A的接触器,每只价值不超过18美元
8536.50.9025 Rotary switches, rated at over 5 A, measuring not more than 5.5 cm by 5.0 cm by 3.4 cm, each with 2 to 8 spade terminals and an actuator shaft with D-shaped cross section 旋转开关,额定电流大于5 A,测量值不超过5.5 cm×5.0 cm×3.4 cm,每个开关有28个铲形端子和一个D形截面的执行机构轴
Rotary switches, single pole, single throw (SPST), rated at over 5 A, each measuring not more than 14.6 cm by 8.9 cm by 14.1 cm 旋转开关,单刀单掷(SPST),额定电流大于5 A,每一个测量值不超过14.6 cm x 8.9 cm x 14.1 cm
8536.50.9031 Momentary contact switches rated at or under 5 A, each designed for use as a motor vehicle overdrive switch 额定值在5 A或以下的瞬时接触开关,每个设计用作机动车超速档开关
Momentary contact switches rated at or under 5 A, valued not over $4 per unit 瞬时接触开关,额定值为5 A或以下,每单位价值不超过4美元
8536.50.9065 Rocker switches, for a voltage not exceeding 1,000 V, designed for use in motor vehicles 摇臂开关,用于不超过1000 V的电压,设计用于机动车辆
8538.90.6000 Molded buttons 模压按钮
Molded housings and covers 模压外壳和盖子
8538.90.8120 Tanks for dead tank circuit
breakers, of aluminum
铝制死槽断路器油箱
8543.30.9080 Aluminum anodes for use with machines and apparatus for electroplating, electrolysis or electrophoresis 电镀、电解或电泳用机器和设备用铝阳极
Chlorine generator chambers containing titanium plates for use with machines and apparatus for electroplating, electrolysis or electrophoresis 电镀、电解或电泳用机器和设备用含钛板的氯气发生器室
Zinc anodes for use with machines and apparatus for electroplating, electrolysis or electrophoresis 电镀、电解或电泳用机器和设备用锌阳极
9015.80.8080 Weather station sets, each consisting of a monitoring display and outdoor weather sensors, having a transmission range of not over 140 m and valued not over $50 per set 气象站设备,每台设备配备一个监测显示器和室外气象传感器,传输范围不超过140米,每套价值不超过50美元
9018.12.0000 Veterinary ultrasound device with black-and-white image quality used as a medical diagnostic tool 作为医学诊断工具的黑白图像质量兽医超声装置
9018.90.6000 Microwave ablation antennas, whether or not with attached controls, as parts of ablation systems used to ablate live tumors 微波消融术天线,不论是否附有控制装置,作为用于切除活肿瘤的消融术系统的一部分。
Parts and accessories of electro- surgical instruments and appliances, other than extracorporeal shock wave lithotripters 非体外冲击波碎石机的电子外科仪器和器具的零件和附件
Smoke evacuation pencils with accompanying tubing and hoses designed to integrate smoke evacuation into electrosurgery by combining both features into a single handpiece, which is designed to apply mono-polar electrosurgical energy to target tissue in a surgical setting while simultaneously evacuating smoke from the surgical site
带有配套管道和软管的烟雾排出铅笔,设计用于将两种功能结合到一个单件中,从而将烟雾排出集成到电外科中,该单件设计用于在手术环境中向目标组织施加单极电外科能量,同时排出手术场所的烟雾
Suction coagulators, consisting of a hand-piece with mechanical and/ or electrical controls and a disposable shaft, used for the coagulation of tissue and aspiration of fluids during surgical procedures 吸引凝结器,由带有机械和/或电子控制装置的手柄和一次性轴组成,用于在外科手术过程中凝固组织和抽吸液体
Vessel sealing and dividing devices that use electrical energy to separate and seal tissue during open or laparoscopic surgical procedures, consisting of a handpiece with mechanical and/or electrical controls, and a bipolar electrode intended to deliver electrosurgical current from a system generator directly to tissues for cutting/ coagulation/ablation 在开放式或腹腔镜手术过程中使用电能分离和密封组织的血管密封和分割装置,包括一个带有机械和/或电气控制装置的机头和一个双极电极,用于从系统发电机输送电外科电流。或直接到组织进行切割/凝固/消融
9022.90.6000 Dental X-ray alignment and positioning apparatus, each valued over $5,000 牙科X射线对准和定位设备,每个价值超过5000美元
Multi-leaf collimators of radiotherapy systems based on the use of X-ray 基于使用X射线的放射治疗系统的多叶准直器
Overhead tube suspension used to hold and position X-ray generating equipment  用于固定和定位X射线发生设备的架空管悬架
9027.80.4530 Instruments and apparatus that chemically analyze food to detect the presence of gluten or peanuts, valued at less than $55 per unit 化学分析食品以检测面筋或花生的仪器和装置,每单位价值低于55美元
9030.39.0100 Picoammeters with recording devices 带记录装置的皮安计
9032.89.6070 Humidistats, each with outdoor sensor, such humidistats valued not over $40 each 每个带室外传感器的恒湿器,每个价值不超过40美元。
美国160亿美元关税加征清单排除产品目录(第七批)
本表清单排除时效说明:2018.7.6~2019.7.30日期间被加征过的,可向美国申请退回加征的税费;
2019.7.31
~2020.7.31日到港美国的货物可免除加征关税
HTS US
商品编码
美国商品描述备注 商品描述(中文版,仅供参考)
3901.90.1000 Chlorinated polyethylene elastomer, in white or pale yellow powder form, containing 28 to 44 percent by weight of chlorine 氯化聚乙烯弹性体,白色或淡黄色粉末状,按重量计含氯28%44% 
3904.61.0090 Polytetrafluoroethylene ((C2F4)n), having a particle size of 5 to 500 microns and a melting point of 315 to 329 degrees Celsius 聚四氟乙烯((C2F4n),粒径5500微米,熔点315329摄氏度 
3906.90.2000 Expandable plastics beads, 0.30 to 0.50 mm in diameter, consisting of copolymers of methylmethacrylate (62 to 64 percent by weight) and styrene 7 (26 to 28 percent by weight)  可膨胀塑料珠,直径0.30-0.50 mm,由甲基丙烯酸甲酯(62-64重量百分比)和苯乙烯726-28重量百分比)共聚物组成。 
3907.20.0000 Polyol blends containing 92 percent or more by weight of polyether polyol (CAS number 9049-71-2) and 2.5% or more by weight of N,Ndimethylcyclohexamine 92%或更多重量的聚醚多元醇和2.5%或更多重量的N,二甲基环己胺的多元醇混合物 
3919.90.5060 Hot melt flat shapes of biaxiallyoriented polypropylene (BOPP) film with an acrylic emulsion 丙烯酸乳液双轴定向聚丙烯(BOPP)薄膜的热熔扁平化 
Polyethylene film, 20.32 to 198.12 cm in width, and 30.5 to 2000.5 m in length, coated on one side with solvent acrylic adhesive, clear or in transparent colors, whether or not printed, in rolls 聚乙烯薄膜,宽20.32198.12厘米,长30.52000.5米,一面涂有溶剂型丙烯酸粘合剂,透明或透明,不论是否印刷,成卷 
Polyvinyl chloride film, coated on one side with pressure sensitive solventacrylic adhesive that allows for easy removal from a flat glass or flat, rigid, clear plastics surface, 106.7 cm, 137.2 cm or 152.4 cm in width, and 30.38 m or 49.99 m in length, with regular perforations measuring 1.5 to 1.6 mm in diameter, where the perforations cover 30, 40 or 50 percent of the surface area 聚氯乙烯薄膜,一面涂有压敏溶剂丙烯酸粘合剂,便于从平板玻璃或平坦、坚硬、透明的塑料表面去除,宽106.7 cm137.2 cm152.4 cm,长30.38 m49.99 m,常规穿孔尺寸为1.51。直径6 mm,其中穿孔覆盖30%40%50%的表面积。 
Printed rectangular polyethylene sheets depicting images on one side, with self-adhesive edges protected with peel-off liners on the other side, measuring 30.5 cm by 45.7 cm or 30.5 cm by 25.4 cm 印刷的矩形聚乙烯板,一面描绘图像,另一面有自粘边缘,用剥离衬垫保护,尺寸为30.5 cm×45.7 cm30.5 cm×25.4 cm 
Self-adhesive colored or printed polyvinyl chloride film with a peelable liner, in rolls, measuring 30.5 cm or 50.8 cm in width and 3.05 m to 6.10 m in length, of a kind used for lining shelves or drawers 带可剥内衬的自粘彩色或印刷聚氯乙烯薄膜,成卷,宽30.5厘米或50.8厘米,长3.05米至6.10米,用于衬架或抽屉。 
3920.10.0000 Printed, nonpermeable plastic film of ethylene designed for use in packaging personal care products such as baby wipes, adult wipes and similar wet stack products 乙烯印刷不渗透塑料薄膜,设计用于包装个人护理产品,如婴儿湿巾、成人湿巾和类似湿叠产品。 
Polyethylene film of a kind used for wrapping perishable foods, in rolls measuring 30.5 cm in width and up to 76.2 m in length, with a starter edge tab, put up in retail packages incorporating a built-in slide cutter and grip strip for holding the film in place until subsequent use 一种用于包装易腐食品的聚乙烯薄膜,卷宽30.5厘米,长度可达76.2米,带有起子边片,装在零售包装中,内含内置滑动切割机和夹条,用于将薄膜固定到位,直至后续使用。 
Rectangular sheets of high-density or low-density polyethylene, 111.75 cm to 215.9 cm in width, and 152.4 cm to 304.8 cm in length, with a sticker attached to mark the center of each sheet, of a kind used in hospital or surgery center operating rooms 高密度或低密度聚乙烯矩形片材,宽111.75 cm215.9 cm,长152.4 cm304.8 cm,贴纸贴在每张片材的中心,用于医院或手术中心手术室。 
8407.90.1020 Spark-ignition rotary or reciprocating internal combustion piston engines to be installed in agricultural or horticultural machinery or equipment, 4,476 W or more but not more than 37.6 kW, each valued not over $180 安装在农业或园艺机械或设备上的火花点火旋转或往复式内燃机,4476 W或以上,但不超过37.6 kW,每台价值不超过180美元。 
8407.90.9010 Gasoline or liquid propane (LP) engines each having a displacement of more than 2 liters but not more than 2.5 liters 汽油或液态丙烷(LP)发动机,每台发动机的排量大于2升但不大于2.5 
8407.90.9040 Spark-ignition internal combustion piston engines, not elsewhere specified or included, 746 W or greater but not exceeding 4,476 W, with an engine displacement of not more than 430 cc 火花点燃式内燃机,未另作规定或包括,746瓦或以上,但不超过4476瓦,发动机排量不超过430毫升 
8419.89.9585 Heat guns 加热枪 
Heated tissue preparation microscope slide flattening tables 热组织制备显微镜载玻片压平台 
Tissue sample paraffin floatation baths 组织样品石蜡漂浮浴 
8424.89.9000 Air amplifiers powered solely by an external source of compressed air, which is routed through the apparatus in such a manner as to draw in ambient air, increase its speed and direct the air through an output port, each such apparatus not exceeding 1 kg in weight 仅由外部压缩空气源提供动力的空气放大器,其通过装置的路径可吸入环境空气,提高其速度并引导空气通过输出端口,每个装置的重量不超过1 kg 
Apparatus capable of generating and projecting liquid particles of a size that simulates haze, fog or snow (depending on the composition of the liquid or powdered source), whether or not incorporating laser or other lighting apparatus 能够产生和投射模拟雾、雾或雪(取决于液体或粉末源的成分)大小的液体颗粒的装置,不论是否包含激光或其他照明装置。 
Apparatus capable of mechanically generating and projecting bubbles from a liquid source, each apparatus weighing more than 2.5 kg but not more than 6.5 kg 能够从液体源机械地产生和投射气泡的装置,每个装置的重量超过2.5 kg但不超过6.5 kg 
Aroma-spraying sets, each of which includes a battery-powered aerosol apparatus and a glass bottle containing not more than 25 ml of essential oil solution, each set weighing not more than 300 g 芳香喷雾装置,每个装置包括电池驱动的气溶胶装置和含有不超过25毫升香精油溶液的玻璃瓶,每套重量不超过300克。 
Collars of a size suitable for dogs or cats, fitted with a means to provide a stimulus to the animal, by means of a sprayer, whether or not combined with a static electric discharge device or sound emitter; and such collars capable of being controlled by an external transmission device, whether or not the controller is presented with the collar as a set 大小适合猫狗的项圈,装有用喷雾器向动物提供刺激的装置,不论是否与静电放电装置或声音发射器组合;以及能够由外部传输装置控制的项圈,不论是否不是,控制器是一套套环。 
Dispensers of hand-cleaning or hand-sanitizing solutions, whether employing a manual pump or a proximity-detecting battery-operated pump, each article weighing not more than 3 kg 洗手液或洗手液的分配器,无论是使用手动泵或接近检测电池驱动泵,每种物品的重量不超过3kg 
Oral irrigators (dental water-jet machines)  口腔冲洗器(牙科喷水机) 
Parts washers, each consisting of a steel basin having a capacity no greater than 100 liters, steel drain plug, support legs and a shelf, a recirculating centrifugal pump assembly, a power cord incorporating an electrical fusible link, a gooseneck spigot assembly, with a steel lid held by a “piano-type”hinge and by a lid support bracket incorporating a mechanical fusible link 零件清洗器,每个都由容量不超过100升的钢盆、钢制排水塞、支撑腿和搁板、循环离心泵组件、包含电熔丝的电源线、鹅颈套管组件和钢盖组成,钢盖由“pian”固定。“O铰链,由盖支撑支架和机械易熔线组成 
Rotary surface washers, consisting of a tube, at one end of which is a fitting suitable for connection to an external power washer and a handle for controlling the position of the apparatus, and at the other end of which is an assembly of one or more rotating brushes that receive the output of the external power washer 旋转表面清洗器,由一根管子组成,管子一端是适合连接外部动力清洗器的配件,另一端是一个或多个旋转刷的总成,用于接收外部动力垫圈 
Wet- and dry-diffusion apparatus fitted for incorporation into scent-releasing machines 干湿扩散装置,安装在气味释放机中。 
8432.29.0060 Walk behind rotary tillers, electric powered, individually weighing less than 14 kg 步进式旋耕机,电动,单个重量小于14 kg 
8432.42.0000 Fertilizer distributors with a capacity not exceeding 40 kg 容量不超过40公斤的施肥机 
8465.95.0055 Benchtop drill presses, each with a power rating of less than 750 watts and valued under $1,000 each 台式钻床,每台额定功率小于750瓦,每台价值低于1000美元。 
8483.30.8020 Bearing housings each valued over $2000 轴承箱,每个价值超过2000美元 
8501.10.6020 AC motors, of 18.65W or more but not exceeding 37.5 W, each with attached actuators, crankshafts or gears 交流电动机,功率18.65W或以上,但不超过37.5W,每台均附有执行机构、曲轴或齿轮。 
C-frame 2-pole AC electric motors, of 18.65W or more but not exceeding 37.5 W, each valued not over $4 18.65W及以上,但不超过37.5W,每台价值不超过4元的C字架2极交流电动机 
8501.10.6080 Electric motors, of 18.65W or more but not exceeding 37.5 W, each valued over $28 but not over $35 18.65瓦或以上但不超过37.5瓦的电动机,每台价值超过28元但不超过35元。 
8501.31.8010 Amorphous silicon solar chargers with a power output of 100 W or less 功率输出小于等于100W的非晶硅太阳能充电器 
8501.52.4000 Electric motors, each with an output rating not exceeding 800 W 电动机,每台输出功率不超过800 
8503.00.9520 Armature shafts for electric motors of heading 8501 品目8501电动机的电枢轴 
Windshield wiper motor covers and shafts 挡风玻璃雨刷器电机盖和轴 
8536.30.8000 Leakage current detection and interruption (LCDI) cords 漏电检测和中断(LCDI)软线 
8537.10.3000 Control boards for stoves, ranges and ovens of heading 8516 品目8516的炉灶、炉灶和烤箱用控制板 
8541.10.0050 Zener diodes, each valued not over $0.25 齐纳二极管,每个价值不超过0.25美元 
8543.70.4500 Position or speed sensors for motor vehicle transmission systems, each valued not over $12 机动车传动系统的位置或速度传感器,每个价值不超过12美元 
Wheel speed sensors for anti-lock motor vehicle braking systems, each valued not over $12 用于汽车防锁制动系统的轮速传感器,每个价值不超过12美元 
8543.70.9960 Antenna amplifiers, each valued not over $15 天线放大器,每个价值不超过15美元 
Antenna noise suppressors, each valued not over $5 天线噪声抑制器,每个价值不超过5美元 
Apparatus using passive infrared detection sensors designed for turning lights on and off 使用被动红外探测传感器的装置,设计用于打开和关闭灯。 
Audio controllers, each valued not over $100 音频控制器,每个价值不超过100美元 
Audio mixers, each valued not over $75 音频混音器,每台价值不超过75美元 
Devices incorporating sensors and monitors for identifying encoded television and radio signal information of survey participants 用于识别调查参与者的编码电视和无线电信号信息的包含传感器和监视器的装置 
Electrically powered cat noise control devices 电动猫噪声控制装置 
Electrically powered combs of a kind used on pets 宠物用电动梳子 
Electrically powered dog training, controlling, repelling or locating apparatus whether or not put up in kits, including dog collars fitted with GPS or other transmitting or receiving devices and electrical barrier transmitter devices 电动狗训练、控制、排斥或定位装置,不论是否成套安装,包括装有GPS或其他发射或接收装置的狗项圈和电子屏障发射器装置。 
Electrically powered insect control apparatus 电动昆虫控制装置 
Electrically powered static-emitting plastic strips designed for use in training or controlling pets 用于训练或控制宠物的电动静电发射塑料条 
LED lamps for flash curing nail polish 闪光固化指甲油用LED 
Liquid leak detectors 液体泄漏探测器 
Multiple device remote controls, other than radio remote control, each valued not over $2 多设备遥控器,无线电遥控器除外,每台价值不超过2美元 
Robots, programmable, measuring not more than 40 cm high by 22 cm wide by 27 cm deep, incorporating an LCD display, camera and microphone but without "hands" 可编程机器人,高度不超过40厘米,宽22厘米,深27厘米,包括液晶显示器、摄像头和麦克风,但不带 
8607.30.1000 Couplers, knuckles and yokes and parts thereof for vehicles of heading 8605 or 8606 用于品目86058606车辆的连接器、转向节和轭及其零件 
8711.10.0000 Motorcycles (including mopeds), with reciprocating internal combustion piston engine of a cylinder capacity not exceeding 50 cc, valued not over $500 each 摩托车(包括轻便摩托车),装有气缸容量不超过50 cc的往复式内燃机,每辆价值不超过500美元 
9001.20.0000 Polarizing film, of triacetate, with a pressure sensitive adhesive backing 偏光膜,三乙酸酯制,有压敏粘合剂背衬 
9025.19.8040 Digital clinical thermometers, valued not over $11 each 数字临床温度计,每个不超过11美元 
9025.19.8080 Cooking thermometers, including candy and deep-fry thermometers 烹饪温度计,包括糖果和油炸温度计 
Infrared thermometers 红外温度计 
9025.80.1000 Combined thermometer and hygrometer devices 温湿度组合仪表 
9028.10.0000 Pulse output gas meters of a kind that can be read remotely 可远程读取的脉冲输出气体表 
9028.20.0000 Pulse output water meters, of cast stainless steel 不锈钢脉冲输出水表 
9029.20.4080 Fingertip pulse oximeters 指尖脉搏血氧仪 
美国2000亿美元关税加征清单排除产品目录(第八批)
本表清单排除时效说明:2018.7.6~2019.8.6日期间被加征过的,可向美国申请退回加征的税费;
2019.8.7
~2020.8.7日到港美国的货物可免除加征关税
3923.10.9000 Container units of plastics, each comprising a tub and lid therefore, configured or fitted for the conveyance, packing, or dispensing of wet wipes 塑料容器单元,每个包括桶和盖子,其配置或装配用于湿巾的输送,包装或分配
3923.50.0000 Injection molded polypropylene plastic caps or lids each weighing not over 24 grams designed for dispensing wet wipes 注塑聚丙烯塑料盖或盖子,每个重量不超过24克,用于分配湿巾
3926.90.3000 Kayak paddles, double ended, with shafts of aluminum and blades of fiberglass reinforced nylon 双头皮划艇桨,铝制轴和玻璃纤维增强尼龙刀片
5402.20.3010 High tenacity polyester yarn not over 600 decitex 高强度聚酯纱不超过600分特
5603.92.0090 Nonwovens weighing more than 25 g/m2
but not more than 70 g/m2
in rolls,not impregnated coated or covered
非织造布重量超过25/平方米,但不超过70/平方米,成卷,未浸渍涂层或覆盖
7323.99.9080 Pet cages of steel 钢制宠物笼
8716.80.5090 Carts, not mechanically propelled, each with three or four wheels, of the kind used for household shopping 家用购物车,非机械驱动,每辆三轮或四轮
8716.90.5060 Truck trailer skirt brackets, other than parts of general use of Section XV 卡车拖车裙架,除第XV部分的一般使用部分外
8903.10.0060 Inflatable boats, other than kayaks and canoes, with over 20 gauge polyvinyl chloride (PVC), each valued at $500 or less and weighing not over 52 kg 充气艇(皮艇及独木舟除外),规格超过20号的聚氯乙烯(PVC),每艘价值不超过500美元,重量不超过52公斤。
Inflatable kayaks and canoes, with over 20 gauge polyvinyl chloride (PVC),each valued at $500 or less and weighing not over 22 kg 充气皮艇及独木舟,规格超过20号聚氯乙烯(PVC),每艘价值不超过500美元,重量不超过22公斤。
美国340亿美元关税加征清单排除产品目录
本表清单排除时效说明:除外责任将于201876340亿美元加征生效之日起适用,并在本通知发布后延长一年
HTS US
商品编码
美国商品描述备注 商品描述(中文版,仅供参考)
8402.90.0010 Heat exchangers, the foregoing comprising parts of goods of heading 8402 and each fitted for heat recovery generator 热交换器,包括第8402品目货物的各部分,以及安装在热回收发电机上的各部分
8412.29.8045 Hydraulic powered swing, winch and travel drives, axial piston type, with attached gearboxes, each valued over $2,000 but not over $7,000 液压动力摆动、绞车和行程驱动,轴向活塞式,带附加变速箱,每个价值超过2000美元,但不超过7000美元
8413.19.0000 Lubricating oil transfer pumps, fitted or designed to be fitted with a measuring device, each with a 1.5 kW motor 润滑油输送泵,装有或设计装有测量装置,每台配有1.5千瓦电动机
8413.50.0010 Oil well and oil field reciprocating positive displacement plunger pumps 油井和油田往复式正排量柱塞泵
8413.50.0090 Positive displacement piston liquid pumps designed for use with gas or electric powered pressure washers, rated for an output of 7 liters or more but not exceeding 16 liters per minute at a pressure of 17 MPa or more but not exceeding 28 MPa 设计用于气体或电动压力垫圈的容积式活塞液体泵,额定输出7升或以上,但在17兆帕或以上但不超过28兆帕的压力下,每分钟不超过16
8413.60.0090 Non-hydraulic rotary positive displacement pumps, not configured as roller pumps, each weighing less than 5.5 kg and valued not over $25 非液压旋转正排量泵,未配置为滚柱泵,每台重量小于5.5千克,价值不超过25美元
8413.70.2004 Submersible centrifugal pumps (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines other than stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard), not fitted or designed to be fitted with a measuring device; each of the foregoing incorporating a magnetic drive motor 潜水离心泵(不包括用于内燃机的燃油、润滑或冷却介质泵,不包括用于制造纤维素纸浆、纸张或纸板的机器的进口储备泵),未安装或设计为安装测量装置;每个前文包括磁力驱动电机
8413.70.2004 Submersible centrifugal pumps (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines), not fitted or designed to be fitted with a measuring device, the foregoing for table-top decorative use incorporating a cascading water feature 潜水离心泵(内燃机用燃料、润滑或冷却介质泵除外),未安装或设计为安装测量装置,上述用于桌面装饰,包括级联水功能
8413.70.2004 Submersible centrifugal pumps (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines; other than stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard), not fitted or designed to be fitted with a measuring device, the foregoing capable of operating at 3,700 liters or more but not exceeding 41,000 liters per hour 潜水离心泵(不包括用于内燃机的燃油、润滑或冷却介质泵;不包括用于制造纤维素纸浆、纸张或纸板的机器的进口储备泵),未安装或设计为安装测量装置,上述泵能够在3下工作,每小时700升或以上但不超过41000
8413.70.2004 Submersible centrifugal pumps, not fitted or designed to be fitted with a measuring device; other than fuel, lubricating or cooling medium pumps for internal combustion piston engines; other than stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard; the foregoing rated not over 1.5 kW 未安装或设计为安装测量装置的潜水离心泵;内燃机用燃料、润滑或冷却介质泵除外;用于制造纤维素纸浆、纸或纸板的机器的进口储备泵除外;出口额定功率不超过1.5千瓦
8413.70.2004 Tabletop water fountains designed for indoor use, the essential character of which is imparted by submersible centrifugal pumps 设计用于室内的台式饮水机,其基本特性由潜水离心泵提供
8413.70.2005 Non-submersible centrifugal pumps for liquids (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines), not fitted or designed to be fitted with a measuring device, the foregoing comprising single-stage, single-suction, close-coupled, with a discharge outlet under 5.08cm in diameter, valued over $4 but not over $6.50 each 液体用非潜水离心泵(内燃机用燃料、润滑或冷却介质泵除外),未安装或设计为安装测量装置,上述泵包括单级、单吸、紧密耦合、带排放口和直径5.08厘米,价值超过4美元,但不超过6.50美元
8413.70.2015 Non-submersible centrifugal pumps for liquids (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines), not fitted or designed to be fitted with a measuring device, the foregoing comprising single-stage, single-suction, close-coupled centrifugal motor pumps with a discharge outlet 5.08 cm or over in diameter, rated at 37 W or more but not exceeding 80 W and with a flow rate of 17 liters per minute or more 液体用非潜水离心泵(内燃机用燃料、润滑或冷却介质泵除外),未安装或设计为安装测量装置,包括单级、单吸、紧耦合离心泵出口直径5.08厘米或以上,额定功率37瓦或以上,但不超过80瓦,流量为每分钟17升或以上
8413.70.2022 Non-submersible centrifugal pumps for liquids (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines), not fitted or designed to be fitted with a measuring device, the foregoing operating at a voltage of 120 V and a frequency of 60 Hz, valued over $4 but not over $9 each 液体用非潜水离心泵(内燃机用燃料、润滑或冷却介质泵除外),未安装或设计为安装测量装置,上述泵在120V电压和60Hz频率下工作,价值超过$4但不超过呃,9美元一个。
8413.70.2025 Non-submersible centrifugal pumps for liquids (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines), not fitted or designed to be fitted with a measurin device, the foregoing comprising single-stage, single-suction, close-coupled, with discharge outlet under 5.08cm in diameter each valued over $150,000 液体用非潜水离心泵(内燃机用燃料、润滑或冷却介质泵除外),未安装或设计为安装测量装置,上述装置包括单级、单吸、紧密耦合、出口低于直径5.08厘米,每件价值超过15万美元
8413.81.0040 Pet water drinking fountains, not incorporating centrifugal pumps 宠物饮水机,不含离心泵
8413.81.0040 Pumps (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines, other than centrifugal pumps), not fitted or designed to be fitted with a measuring device, the foregoing rated at 37 W or more but not exceeding 80 W, with a flow rate of 17 liters or more per minute 泵(不包括燃油、润滑或冷却介质泵,不包括离心泵),未安装或设计为安装测量装置,上述额定功率为37W或以上,但不超过80W,流速为每分钟17升或以上
8413.91.9010 Tubes of copper alloy for use in solenoid fuel pumps, each valued not over $1 电磁燃油泵用铜合金管,每根价值不超过1美元
8413.91.9095 Parts of pumps, other than fuel-injection pumps for compression-ignition engines or stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard, the foregoing of plastics 泵的零件,不包括压燃式发动机的喷油泵或进口的用于制造纤维素纸浆、纸张或纸板的机器的原料泵
Rods and couplings designed for use with oil and gas field pumps, the foregoing of American Petroleum Institute grade 设计用于油气田泵的杆和联轴节,美国石油学会等级
Volutes of a kind designed for use with centrifugal sump pumps 离心式污水泵用蜗壳
8414.30.4000 Air conditioner compressors of a kind used in motor vehicles 汽车用空调压缩机
8414.30.4000 Compressors designed for use in household refrigerators, not exceeding 187 W (1/4 horsepower), each valued not over $30 家用冰箱用压缩机,不超过187瓦(1/4马力),每台价值不超过30美元
8414.30.4000 Single phase, rotating piston type rotary compressors with split capacitor motors and refrigerant pumps, valued not over $70 单相旋转活塞式旋转压缩机,带分体式电容电机和制冷剂泵,价值不超过70美元
8414.30.8060 Rotary compressors, each exceeding 746 W (1 horsepower) but not exceeding 2,984 W (4 horsepower), with a cooling capacity ranging from 2,300 W (7,960 BTU) to 5,500 W (18,766 BTU) 旋转式压缩机,每台功率超过746瓦(1马力),但不超过2984瓦(4马力),制冷量从2300瓦(7960BTU)到5500瓦(18766BTU
8414.30.8060 Rotary compressors, each exceeding 746 W (1 horsepower) but not exceeding 2,984 W (4 horsepower), with a cooling capacity ranging from 750 to 1400 W 旋转式压缩机,每台功率超过746瓦(1马力),但不超过2984瓦(4马力),制冷量在7501400瓦之间
8414.30.8070 Scroll compressors, each exceeding 2,238 W (3 horsepower) but not exceeding 7,460 W (10 horsepower), valued over $250 but not over $500 each 涡旋式压缩机,每台功率超过2238瓦(3马力),但不超过7460瓦(10马力),每台价值超过250美元,但不超过500美元
8414.30.8080 Scroll-type compressors, each exceeding 7,460 W (10 horsepower), valued over $500 but not over $900 涡旋式压缩机,每台功率超过7460瓦(10马力),价值超过500美元,但不超过900美元
8414.90.4165 Compressor housings designed for turbochargers 为涡轮增压器设计的压缩机外壳
8417.80.0000 Mineral slab production equipment including exhaust gas treatment apparatus therefor 矿板生产设备,包括废气处理装置
8417.80.0000 Twin reactor pyrolysis waste processing equipment consisting of two twin primary and one secondary processing units 双反应器热解废物处理设备,包括两个一级和一个二级处理装置
8417.90.0000 Parts of dry hearth melting furnaces 部分干炉熔炼炉
8418.69.0110 Portable domestic ice cube makers of stainless steel, valued not over $70 each 便携式家用不锈钢制冰机,每台价值不超过70美元
8418.69.0160 Absorption liquid chilling units valued over $130,000 each 每台价值超过13万美元的吸收式液体制冷机组
8418.69.0180 Chest-type coolers, compression type, with an interior volume exceeding 440 liters but not exceeding 600 liters 压缩式柜式冷却器,内部容积超过440升但不超过600
Upright freezers, compression type, with an interior volume exceeding 1,300 liters but not exceeding 2,100 liters 立式压缩式冷冻柜,内部容积超过1300升但不超过2100
8419.50.1000 Brazed aluminum plate-fin heat exchangers, each valued not over $250 铜焊铝板翅式换热器,每台价值不超过250美元
8419.50.5000 Heat exchanger units, designed for use as part of a heat exchange system weighing more than 27 metric tons but not more than 32 metric tons and incorporating shell-and-tube type heat exchangers 热交换器装置,设计用作重量超过27公吨但不超过32公吨的热交换系统的一部分,包括管壳式热交换器
8419.50.5000 Heat exchanger units, designed for use as part of a heat exchange system weighing more than 40 but not more than 44 metric tons and designed to incorporate an ethylene dichloride vent eductor liquid cooler 换热器装置,设计用作重量超过40但不超过44公吨的换热系统的一部分,并设计为包含二氯化乙烯排气喷射器液体冷却器
8419.50.5000 Heat exchanger units, designed for use as part of a heat exchange system weighing more than 63.5 metric tons and not designed to operate with chilled MCB Coolers using propylene refrigerant 热交换器装置,设计用作重量超过63.5公吨的热交换系统的一部分,不设计用于使用丙烯制冷剂的冷冻MCB冷却器
8419.50.5000 Heat exchanger units, designed for use individually or as part of a system weighing more than 63.5 metric tons and not designed to operate with chilled MCB coolers using propylene refrigerant 换热器装置,设计用于单独使用或作为系统的一部分,重量超过63.5公吨,不设计用于使用丙烯制冷剂的冷冻MCB冷却器
8419.50.5000 Heat exchangers, each valued not over $17,000 换热器,每台价值不超过17000美元
8419.50.5000 Industrial tubular heat exchange units 工业管式换热器
8419.90.3000 Heat exchanger plates, cores, finned tubes, cones, shells, bonnets, flanges and baffles 换热器板、芯、翅片管、锥、壳、阀盖、法兰和挡板
8420.10.9040 Calendering machines other than for metals or glass, such machines each weighing more than 12,000 kg 压延机,金属或玻璃除外,每台重量超过12000公斤
8420.10.9040 Thermal roll laminators, each valued not over $450 热辊复合机,每台价值不超过450美元
8420.99.9000 Cutting pads, platforms, base plates, pads, shims, trays, which function as guides for hand-operated table-top calendering machines of a width not exceeding 51cm 切割垫、平台、底板、垫、垫片、托盘,用作宽度不超过51cm的手动台式压延机的导轨
8421.21.0000 Glass water filtration pitchers and filters 玻璃水过滤罐和过滤器
8421.21.0000 Household alkaline water ionizer and filtration apparatus 家用碱性水电离过滤装置
8421.21.0000 Household water filter cartridges 家用滤水器滤芯
8421.21.0000 Ionization filters valued over $35 but not over $45 each 电离过滤器价值超过35美元但不超过45美元
8421.21.0000 Water filters for pet water fountains pet饮水机滤水器
8421.29.0065 Accumulators for heat pumps and air conditioners, valued over $8 but not over $12 each 热泵及空调用蓄能器,每台价值8元以上12元以下
8421.29.0065 Basket, Y-type or duplex strainers, each having a threaded or flanged-style end 篮式Y型或双联过滤器,每个过滤器都有螺纹或法兰式端头
8421.29.0065 Cage-type cartridges, designed to remove water directly from fuel tanks, valued not over $2 each 笼式滤筒,设计用于直接从油箱中除去水,每个价值不超过2美元
8421.29.0065 Filtering or purifying machinery valued over $2,500,000 价值超过2500000美元的过滤或净化设备
8421.29.0065 Hydraulic fluid filters, rated at less than 100 kPa, measuring no more than 10 cm in diameter and 12 cm in length, each valued not more than $2 液压油过滤器,额定压力小于100千帕,直径不超过10厘米,长度不超过12厘米,每件价值不超过2美元
8421.29.0065 Polymer filtration systems of a kind used to separate solid contaminants from liquid polymers, each valued over $30,000 but not over $40,000 用于分离固体污染物和液体聚合物的聚合物过滤系统,每种系统价值超过30000美元,但不超过40000美元
8421.29.0065 Receiver-driers for air conditioning units used in commercial vehicles 商用车空调机组用接收器干燥器
8421.29.0065 Stainless steel mesh filters with plastic cores, of a kind used for preventing clogs in paint sprayers, each valued not over $1.50 带塑料芯的不锈钢网过滤器,用于防止喷漆机堵塞,每台价值不超过1.50美元
8421.39.8090 Disposable plastic filters of a kind suitable for filtering and dehumidifying a patient's breath in a medical device such as a gas analyzer 一种一次性塑料过滤器,适用于在气体分析仪等医疗设备中过滤和除湿病人的呼吸
8421.99.0040 Fiberglass-reinforced polyethylene pressure vessels 玻璃钢聚乙烯压力容器
8421.99.0040 Parts of filters, each valued not over $8 部分过滤器,每个价值不超过8美元
8421.99.0040 Parts of swimming pool vacuum cleaners 游泳池吸尘器零件
8421.99.0040 Self-cleaning filters, of stainless steel, of a kind suitable for use in filtering municipal, agricultural or industrial water supplies, valued over $700 but not over $800 each 不锈钢自洁过滤器,适用于过滤市政、农业或工业用水,每台价值700美元以上,但不超过800美元
8421.99.0040 Swimming pool filter cartridges 游泳池滤筒
8421.99.0080 Paint sprayer filters of paper, with steel mesh casings and plastic end caps, valued not over $1 each 喷漆机滤纸器,带钢网外壳和塑料端盖,每个价值不超过1美元
8421.99.0080 Parts of vortex gas separators 部分涡流气体分离器
8422.30.9191 Vacuum sealing machines, each valued over $30 but not over $40 真空封口机,每台价值30元以上40元以下
8422.90.0640 3-member slides with ball bearings, of stainless steel, for use in household dishwashers 家用洗碗机用带滚珠轴承的不锈钢三杆滑轨
8422.90.0640 Stamped outer door panels of stainless steel for household dishwashing machines 家用洗碗机用不锈钢冲压外门板
8423.20.1000 Electronic scales for continuous weighing of quartz, powder and resin on conveyors, capable of measuring 2 kg or more but not exceeding100 kg of materials per minute 用于在输送机上连续称量石英、粉末和树脂的电子秤,每分钟可测量2公斤或更多但不超过100公斤的材料
8425.39.0100 Winches, each having a steel frame with a ratchet and pawl mechanism, operated manually 绞车,每个都有一个钢框架,带有棘轮和棘爪机构,手动操作
8427.10.8010
(201971日前用此编码)
Electric operator-riding pallet trucks, each with a load capacity not exceeding 3,700 kg (described in statistical reporting number 8427.10.8010, prior to July 1, 2019 or described in 8427.10.8030, post July 1, 2019) 电动托盘车司机,每个载货量不超过3700kg(统计报告编号8427.10.8010所述,201971日之前或8427.10.8030所述,201971日之后)
8427.10.8010
(201971日前用此编码)
Electric operator-riding reach-type fork-lift trucks, each with a load capacity exceeding 1,300 kg but not exceeding 2,100 kg (described in statistical reporting number 8427.10.8010, prior to July 1, 2019 or described in statistical reporting number 8427.10.8030, post July 1, 2019) 电动操作人员乘坐伸缩式叉车,每辆载重超过1300kg但不超过2100kg(统计报告编号8427.10.8010所述,201971日前;统计报告编号8427.10.8030所述,201971日后)
8427.10.8030
(201971日后用此编码)
Electric operator-riding pallet trucks, each with a load capacity not exceeding 3,700 kg (described in statistical reporting number 8427.10.8010, prior to July 1, 2019 or described in 8427.10.8030, post July 1, 2019) 电动托盘车司机,每个载货量不超过3700kg(统计报告编号8427.10.8010所述,201971日之前或8427.10.8030所述,201971日之后)
8427.10.8030
(201971日后用此编码)
Electric operator-riding reach-type fork-lift trucks, each with a load capacity exceeding 1,300 kg but not exceeding 2,100 kg (described in statistical reporting number 8427.10.8010, prior to July 1, 2019 or described in statistical reporting number 8427.10.8030, post July 1, 2019) 电动操作人员乘坐伸缩式叉车,每辆载重超过1300kg但不超过2100kg(统计报告编号8427.10.8010所述,201971日前;统计报告编号8427.10.8030所述,201971日后)
8427.20.4000 Rider-type, counterbalanced fork-lift trucks, each powered by an internal combustion engine, with pneumatic tires, having a load capacity of 900 kg or more but not exceeding 18,000 kg 背负式平衡重叉车,每辆由内燃机驱动,带充气轮胎,载重900公斤或以上,但不超过18000公斤
8427.20.4000 Rider-type, counterbalanced fork-lift trucks, each powered by an internal combustion engine, with solid tires, having a load capacity of 1,300 kg or more but not exceeding 3,000 kg 背负式平衡重叉车,每辆由内燃机驱动,带实心轮胎,载重1300公斤或以上,但不超过3000公斤
8431.39.0010 Baggage carriers, of polyethylene, suitable for use solely or principally with conveyers of subheading 8428.39 聚乙烯制行李架,仅适用于或主要适用于第8428.39子目的输送机
8428.39.0000 Continuous action elevators and conveyors of the kind designed for use in airports for handling baggage 设计用于机场处理行李的连续动作电梯和输送机
8428.39.0000 Roller conveyors with pallet rotators or pallet corner rotators 带托盘旋转器或托盘转角旋转器的辊道输送机
8428.90.0290 Rotary positioning machines for use with machine tools 机床用旋转定位机
8429.51.1055 Shovel loaders, each with a bucket capacity of 11.4 m3 to 12 m3, and an operating weight of 30,000 kg or more but not exceeding 36,000 kg 铲运机,每个斗容量为11.4m312m3,工作重量为30000kg或以上,但不超过36000kg
8431.10.0090 Winch handles 绞盘手柄
8431.20.0000 Parts suitable for use solely or principally with self-propelled works trucks powered by an electric motor and fitted with lifting or handling equipment of subheading 8427.10 仅适用于或主要适用于由电动机驱动并装有第8427.10子目所述起重或装卸设备的自行式工程卡车的零件
8431.39.0010 Drive frames weighing over 3.6 metric tons and parts thereof 重量超过3.6公吨的传动架及其零件
8431.41.0040 Grappler attachments, other than buckets, each valued over $250 but not over $350 抓斗附件,除桶外,每件价值超过250美元但不超过350美元
8431.41.0040 Grappler buckets, each valued over $800 but not over $900 抓斗桶,每个价值超过800美元但不超过900美元
8431.43.8060 Bridge plug assemblies for oil and gas boring or sinking machinery, other than for offshore oil and natural gas drilling and production platforms 石油和天然气钻采平台以外的石油和天然气钻采机械用桥塞组件
8431.49.9020 Metal frames or assemblies of a kind suitable for use as attachments to agricultural tractors 适于用作农业拖拉机附件的金属框架或组件
8431.49.9095 Counterweight castings of iron or steel designed for use on excavators and wheel loaders 挖掘机和轮式装载机用对重铁或钢铸件
8431.49.9095 Dredge cutter teeth, comprising parts suitable for use solely or principally with the machinery of heading 8429 or 8430 挖泥船绞刀齿,包括仅适用于或主要适用于第84298430品目机械的零件
8431.20.0000 Counterweight castings of iron or steel, designed for use on skid loaders 撬装机用对重铁或钢铸件
8432.90.0050 Parts of harrows or cultivators incorporating bearings 带有轴承的耙或耕耘机部件
8432.90.0060 Ductile iron casting, weighing more than 0.75 kg but not more than 18.25 kg, with a maximum dimension exceeding 190 mm but not exceeding 695 mm 球墨铸铁件,重量0.75公斤以上18.25公斤以下,最大尺寸190毫米以上695毫米以下
8436.10.0000 Electrically powered granulator machine 电动造粒机
8436.80.0090 Animal feeding machinery 动物饲养机械
8436.99.0090 Parts of animal feeding machinery 动物饲养机械零件
8441.40.0000 Machines, of a kind used to produce cylindrical paper drinking straws 一种机器,用于生产圆柱形纸,饮用吸管
8443.99.2010 Ink cartridges, each weighing more than 1 kg 墨盒,每个墨盒重量超过1千克
8443.99.2050 Paper handling assemblies as described in Additional U.S. note 2(g) to chapter 84 84章附加美国注释2g)中所述的纸张处理组件
8443.99.2050 Printer maintenance kits consisting of two or more replacement parts for printer units of subheading 8443.32.10 specified in additional U.S. note 2 to chapter 84 由第84章附加美国注释2中规定的第8443.32.10子目打印机部件的两个或多个替换零件组成的打印机维护工具包
8454.30.0010 Cold-chamber die casting machines having a maximum casting volume of 52.78 m3, a die height of 0.4 m or more but not exceeding 1 m, and a maximum die locking force of 8,400 kN 冷室压铸机,最大铸造体积52.78m3,模具高度0.4m或以上但不超过1m,最大锁模力8400kn
8455.90.8000 Cylindrical side guides, the foregoing comprising parts of metal-rolling mills 圆柱形侧导板,上述部件包括金属轧机的零件
8458.19.0020 Horizontal lathes for removing metal, electrically powered, not numerically controlled, each with mill head attachment mounted above the lathe headstock 用于去除金属的卧式车床,电动,非数控,每台车床的主轴箱上方装有磨头附件
8459.10.0000 Way-type unit head machine tools, each valued over $1,800 but not over $2,200 导轨式单头机床,每台价值1800元以上2200元以下
8459.61.0080 New numerically-controlled milling machines capable of end beveling pipe of an outside diameter of 60 cm or more but not exceeding 305 cm 新型数控铣床,可对外径60厘米或以上但不超过305厘米的管道进行端部斜切
8459.69.0020 Benchtop milling machines, not numerically controlled, valued over $400 but not over $700 each 台式铣床,非数控,每台价值400美元以上700美元以下
8462.29.0030 Press brakes, not numerically controlled, having a drive capacity rating of 3kW 非数字控制的压力制动器,额定驱动功率为3kw
8462.39.0050 New hydraulic shearing machines, not numerically controlled, with a power of 7.5 kW, valued at $3,025 or more each 新型液压剪板机,非数控,功率7.5千瓦,每台价值3025美元或以上
8462.91.8090 Hydraulic presses, not numerically controlled, each valued over $85,000 but not over $110,000 非数控液压机,每台价值超过85000美元但不超过110000美元
8462.91.8090 Machines for end-forming metal pipes, such pipes ranging in outside diameter from 60 cm or more but not exceeding 305 cm 金属管端部成形机,这种管子的外径为60厘米或以上,但不超过305厘米
8465.92.0051 Woodworking routers, each with a 1,306 W (1-3/4 horsepower) motor and valued not over $60 木工路由器,每台配有1306瓦(1-3/4马力)电机,价值不超过60美元
8465.99.0220 Woodworking lathes, each with a motor of 224 watts (0.3 horsepower) or more but not exceeding 896 W (1.2 horsepower), the foregoing which operate at speeds of 600 to 3,500 rpm, valued not over $130 each 木工车床,每台电机为224瓦(0.3马力)或以上,但不超过896瓦(1.2马力),上述机器以6003500/分的速度运转,每台价值不超过130美元
8466.10.0175 Tool holders of a kind used to hold various types of metal working tools for use on milling machine spindles 铣床主轴用夹持各种金属加工工具的一种刀架
8466.30.8000 Machine tool stands having leveling, stabilizing, attachment or other special features 具有调平、稳定、连接或其他特殊功能的机床支架
8466.92.5010 Work stands designed for use with miter saws, whether or not wheeled 设计用于斜接锯的工作台,无论是否有轮
8467.11.1040 Rotary grinders for working in the hand, suitable for metal working, each valued under $10 手用旋转磨床,适合金属加工,每台价值10美元以下
8467.11.1040 Rotary sanders for working in the hand, suitable for metal working, each valued under $20 手用旋转砂光机,适合金属加工,每台价值20美元以下
8467.11.1080 Pneumatic rotary cutters, suitable for metal working, each with a maximum blade diameter of 11 cm and a maximum speed of 20,000 rpm, valued under $10 each 适用于金属加工的气动旋转刀具,每个最大刀片直径为11厘米,最大速度为20000/分,每个价值不超过10美元
8471.70.9000 External optical disk drive storage units enclosed in cases, each valued under $60 盒装外部光盘驱动器存储单元,每个价值不超过60美元
8473.40.8600 Parts of automatic teller machines 自动柜员机零件
8474.10.0090 Stationary sand screening equipment having more than 90 but less than 182 metric ton per hour capacity  固定式砂筛设备,每小时处理能力90吨以上182吨以下
8474.31.0000 Portable concrete or mortar mixers, electrically powered, with a capacity not exceeding 0.15 m3 电动便携式混凝土或砂浆搅拌机,容量不超过0.15m3
8474.80.0015 Mineral pressing machine equipped with vibration motors 振动电机压矿机
8477.80.0000 Electrically powered cutting machines for working supple plastics, valued not over $300 per unit  用于加工软塑料的电动切割机,每台价值不超过300美元
8477.90.8501 Injection mold inserts 注射模镶块
8477.90.8501 Mold base parts, each with a length of more than 19 cm but not more than 91 cm, a width of more than 3 cm but not more than 61 cm and a thickness of more than 2 cm but not more than 16 cm; the foregoing preconfigured with standard mill features such as drilled holes, slots and bushings to accommodate the various pins and tube dowels necessary for the functioning of the plastic injection mold 模架零件,每件长度超过19厘米但不超过91厘米,宽度超过3厘米但不超过61厘米,厚度超过2厘米但不超过16厘米;上述预配置有标准的铣刀特征,如钻孔、槽和衬套,以适应塑料注射模工作所需的各种销钉和管销钉
8477.90.8540 Sidewall plates, top bead rings, bottom bead rings and upper bag clamp rings, of steel, all the foregoing being parts of tire molds 侧壁板、上胎圈、下胎圈和上袋夹环,钢制,上述均为轮胎模具的零件
8479.82.0040 Machines of a kind suitable for mixing granules of rock or similar hard materials with plastic resin to form a homogenous mixture 一种机器,适用于将岩石或类似硬质材料的颗粒与塑料树脂混合以形成均匀混合物
8479.82.0040 Modularized plants for the manufacture of lithium hydroxide by functions involving mixing, kneading or stirring 通过混合、捏合或搅拌功能制造氢氧化锂的模块化工厂
8479.82.0080 Machines for crushing/grinding pills, each valued over $20 but not over $35 粉碎/研磨药丸的机器,每台价值超过20美元但不超过35美元
8479.89.9499 Granulating machines not specifically designated for use with specific particulate materials, each valued more than $25,000 未特别指定用于特定颗粒材料的造粒机,每台价值超过25000美元
8479.89.9499 Vertical or single shaft shredding machines of a kind suitable for use in the recycling industry, weighing over 10,000 kg but not over 15,000 kg each 适用于回收工业的立式或单轴碎纸机,每台重量在10000公斤以上,但不超过15000公斤
8479.90.9496 Parts of drain and sewer cleaning machines 排水和污水清洗机零件
8479.90.9496 Parts of suspension arms of a kind used in dental lighting or delivery systems 用于牙科照明或输送系统的悬挂臂零件
8480.20.0000 Mold bases, of steel, measuring 27.9 cm by 38.1 cm by 45.7 cm, each weighing 409.1 kg 钢制模架,尺寸27.9cm×38.1cm×45.7cm,每个重409.1kg
8480.30.0000 Plastic injection molding patterns each valued over $50,000 塑料注塑模具,每件价值超过50000美元
8480.71.8060 Compression type tire molds 压缩式轮胎模具
8481.20.0020 Hydraulic solenoid timing valve each valued not over $20 液压电磁正时阀,每个价值不超过20美元
8481.30.9000 Check valves, of plastics or rubber 塑料或橡胶制止回阀
8481.90.9020 Ball type angle cock valve bodies, of cast iron, for oleohydraulic or pneumatic transmissions 球型角旋塞阀阀体,铸铁,用于油液传动或气动传动
8481.90.9020 Valve bodies, of aluminum, of valves for oleohydraulic or pneumatic transmissions 铝合金阀体,用于油液传动或气动传动的阀门
8481.90.9040 Hydraulic valve parts, other than valve bodies, of valves for oleohydraulic or pneumatic transmissions, each valued not over $5 液压或气动传动用阀门的液压阀件(阀体除外),每件价值不超过5美元
8481.90.9085 Valve pressure relief components, including body covers, and diaphragms 阀门泄压部件,包括阀体盖和隔膜
8482.10.5004 Unground ball bearings each valued not over $4 不接地滚珠轴承,每个价值不超过4美元
8482.10.5008 Thrust bearings each valued not over $2 推力轴承,每个价值不超过2美元
8482.10.5016 Wheel hub bearing units, of steel, of a kind used on motor vehicles, trailers and lawn equipment, each having one flange for the wheel and brake attachment and a second flange for attaching to the vehicle suspension, and having a sealed and lubricated double row of bearings 用于机动车辆、拖车和草坪设备的钢制轮毂轴承装置,每一个都有一个用于车轮和制动附件的法兰和一个用于连接车辆悬架的第二个法兰,并有一个密封和润滑的双列轴承
8482.10.5028 Angular contact ball bearings, not for use with wheel hub bearing units, having an inner diameter of 25 mm or greater but not exceeding 55 mm, an outer diameter of 50 mm or greater but not exceeding 95 mm, a width of 20 mm or greater but not exceeding 35 mm, with single or double row of steel balls and a cage of steel or plastics 角接触球轴承,不与轮毂轴承装置一起使用,内径25mm或更大但不超过55mm,外径50mm或更大但不超过95mm,宽度20mm或更大但不超过35mm,带单列或双列钢球一笼钢铁或塑料
8482.10.5028 Angular contact ball bearings, not over 40 mm in width, other than wheel hub bearing units 角接触球轴承,宽度不超过40mm,轮毂轴承单元除外
8482.10.5028 Single row angular contact ball bearings, other than wheel hub bearing units, valued over $5.50 but not over $6.25 each 单排角接触球轴承(轮毂轴承单元除外),价值超过$5.50但不超过$6.25
8482.10.5036 Single row radial bearings, with an outside diameter less than 9 mm, each valued not over $1 单列径向轴承,外径小于9mm,每一个不超过$1
8482.10.5056 Single row radial bearings, with an outside diameter over 100 mm, each valued not over $9 多相交流电动机,输出功率超过37.5瓦但不超过74.6瓦,齿轮电动机除外,每台重量不超过600克,价值不超过15美元
8482.10.5060 Radial double row ball bearings, having an inner diameter of 10 mm or greater but not exceeding 90 mm, an outside diameter of 30 mm or greater but not exceeding 170 mm, and a width of 14.3 mm or greater but not exceeding 68.3 mm, with a cage of steel or plastics 径向双列球轴承,内径10毫米或以上但不超过90毫米,外径30毫米或以上但不超过170毫米,宽度14.3毫米或以上但不超过68.3毫米,带钢或塑料保持架
8482.20.0061 Tapered roller bearings, with cups having an outside diameter exceeding 102 mm but not exceeding 203 mm, each valued not over $9 圆锥滚子轴承,带外圈,外径超过102毫米但不超过203毫米,每个外圈的价值不超过9美元
8482.20.0070 Single row tapered roller bearing cone assemblies for cups having an outside diameter not exceeding 102 mm 外径不超过102mm的外圈用单列圆锥滚子轴承内圈组件
8482.20.0081 Steel tapered roller bearing cone assemblies, entered without cups, with an inner race that extends beyond the width of the roller cage, for cups having an 17 outside diameter exceeding 102 mm but not exceeding 203 mm 钢制圆锥滚子轴承内圈总成,不带外圈,内圈延伸超过滚子保持架的宽度,用于17个外径超过102mm但不超过203mm的外圈
8482.20.0081 Tapered roller bearing cone assemblies, each valued not over $9, for cups having an outside diameter exceeding 102 mm but not exceeding 203 mm 圆锥滚子轴承圆锥组件,每件价值不超过$9,适用于外径超过102mm但不超过203mm的皮碗
8482.20.0090 Single row tapered roller bearing cone assemblies for cups having an outside diameter exceeding 203 mm 外径超过203毫米的外圈用单列圆锥滚子轴承内圈组件
8482.30.0080 Spherical roller bearings, other than single row, with an inside diameter of 20 mm or greater but not exceeding 300 mm, an outside diameter of 50 or greater but not exceeding 300 mm, and a width of 15 mm or greater but not exceeding 100 mm 非单列球面滚子轴承,内径20毫米或以上但不超过300毫米,外径50毫米或以上但不超过300毫米,宽度15毫米或以上但不超过100毫米
8482.50.0000 Cylindrical roller thrust bearings, each having an inside diameter of 77.2 mm, an outer diameter of 95.6 mm, and a width of 3.445 mm, comprising 64 cylindrical rollers measuring 2.24 mm in diameter and 5 mm in length, a steel cage and a steel axial washer 圆柱滚子止推轴承,每个轴承的内径为77.2mm,外径为95.6mm,宽度为3.445mm,包括64个直径为2.24mm、长度为5mm的圆柱滚子、一个钢保持架和一个钢制轴向垫圈
8482.99.6510 Adapter sleeve assemblies for spherical roller bearings consisting of a tapered sleeve adapter, a locknut and lock washer 球面滚柱轴承的适配器套筒组件,包括锥形套筒适配器、锁紧螺母和锁紧垫圈
8483.50.6000 Flywheels of a kind used in manual automotive transmission 汽车手动变速器用飞轮
8483.60.4080 Universal joints, each weighing not more than 5 kg 万向节,每个重量不超过5kg
8483.90.1010 Chain sprockets with forged hubs, the foregoing with outer diameter of 59.4 mm or greater but not exceeding 999.4 mm and width of 22.4 mm or greater but not exceeding114.3 mm 外直径59.4mm及以上,但不超过999.4mm,宽度22.4mm及以上,但不超过114.3mm的锻造轮毂链轮
8483.90.1050 Chain sprockets, each not more than 55 mm in diameter 链轮,每个直径不超过55mm
8484.10.0000 Gaskets of metal sheeting combined with other material or of two or more layers of metal, each of the foregoing valued not over $3 由金属板与其他材料或两层或多层金属组合而成的垫圈,每层的价值不超过$3
8487.90.0080 Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, and not specified or included elsewhere in chapter 84, each valued not over $20 机械零件,不含电连接器、绝缘体、线圈、触点或其他电气特性,也不在第八十四章其他地方指明或包括,每件价值不超过$20
8501.10.4020 AC motors, C-frame single-phase induction-type, without external housing, of an output not exceeding 18.65 W, not synchrous, each valued not over $20 交流电动机,C框单相感应式,无外罩,输出功率不超过18.65瓦,不同步,每台价值不超过20美元
8501.10.4020 Electric motors, AC, permanent split capacitor type, not exceeding 16 W 不超过16瓦的永久分裂电容式交流电动机
8501.10.4020 Electric motors, AC, permanent split capacitor type, with a height of 97.5 mm or more but not exceeding 127.0 mm and a length of 82.8 mm or more but not exceeding 226.0 mm, with an output of 8.9 kW or more but not exceeding 12 kW, 60 hertz 电动机,交流,永久分体式电容器式,高度97.5毫米或以上,但不超过127.0毫米,长度82.8毫米或以上,但不超过226.0毫米,输出功率8.9千瓦或以上,但不超过12千瓦,60赫兹
8501.10.4020 Shaded-pole AC motors, of an output not exceeding 18.65 W, each valued not over $5 输出功率不超过18.65瓦,每台价值不超过$5的罩极交流电动机
8501.10.4040 Brushless motors, of an output not exceeding 18.65 W, not synchrous, each valued not over $0.50 无刷电动机,输出功率不超过18.65瓦,不同步,每台价值不超过0.50美元
8501.10.4060 DC servo motors or actuators, of an output of under 18.65 W, valued over $2 but not over $2.50 each 直流伺服马达或执行器,输出功率18.65瓦以下,每台价值2元以上2.50元以下
8501.20.2000 Universal AC/DC motors, each rated at more than 37.5 W but not more than 65 W and valued at less than $20 通用交直流电动机,每台额定功率大于37.5W但不大于65W,价值小于20美元
8501.20.6000 Quarter-turn actuator motors, of an output exceeding 746 W, each valued not over $140 输出功率超过746瓦的四分之一转作动马达,每台价值不超过140美元
8501.31.2000 DC motors, brushless, of an output rated at 48 W or greater but not exceeding 60 W, each valued not over $14 无刷直流电动机,输出功率为48瓦或以上,但不超过60瓦,每台价值不超过14美元
8501.31.2000 DC motors, brushless, rated at 32 V, designed to operate in saltwater environment, each valued over $35 直流电动机,无刷,额定电压32V,设计用于盐水环境,每台价值超过35美元
8501.31.2000 DC motors, of an output exceeding 37.5 W but not exceeding 74.6 W, each incorporating a thermal switch, the foregoing valued not over $22 输出功率超过37.5瓦但不超过74.6瓦的直流电动机,每部均包括一个热开关,上述价值不超过$22
8501.31.2000 DC motors, of an output exceeding 37.5 W but not exceeding 74.6 W, valued over $2 but not over $30 each 直流电动机,输出功率超过37.5瓦但不超过74.6瓦,每台价值超过$2但不超过$30
8501.51.4040 AC motors, multiphase, of a kind used with paint sprayers to regulate the flow of paint, of an output exceeding 74.6 W but not exceeding 735 W, valued not over $200 each 多相交流电动机,与喷漆机一起用以调节油漆流量,输出功率超过74.6瓦但不超过735瓦,每台价值不超过200美元
8501.31.6000 Brushless, variable speed, DC motors, of an output of 750 W 无刷变速直流电动机,输出功率750
8501.31.6000 DC motor and gear box assemblies, of an output of 746 W or more but not exceeding 750W, of a kind used to open and close a swing door, the foregoing valued not over $300 each 直流电动机及齿轮箱组件,输出功率746瓦或以上,但不超过750瓦,用以开关旋门者,前项各不超过$300
8501.51.2040 AC motors, multi-phase, of an output exceeding 37.5 W but not exceeding 74.6 W, other than gear motors, each weighing less than 600 grams and valued less than $15 多相交流电动机,输出功率超过37.5瓦但不超过74.6瓦,齿轮电动机除外,每台重量不超过600克,价值不超过15美元
8501.51.4040 AC motors, multi-phase, of an output exceeding 37.5 W but not exceeding 74.6 W, each fitted with a timing belt 输出功率超过37.5瓦但不超过74.6瓦的多相交流电动机,每一电动机均装有正时皮带
8501.51.4040 AC motors, multi-phase, of rolled steel frame construction  轧钢框架结构的多相交流电动机
8501.52.8040 AC motors, multiphase, of an output exceeding 74 kW but not exceeding 75 kW, other than for use in civil aircraft 多相交流电动机,输出功率超过74千瓦但不超过75千瓦,民用航空器用除外
8501.53.4080 AC motors, multi-phase, of an output exceeding 93 kW but not exceeding 112 kW 输出功率超过93千瓦但不超过112千瓦的多相交流电动机
8501.53.8040 AC motors, multi-phase, of an output of 186.5 kW or more but not exceeding 373 kW, having a cast iron frame construction 多相交流电动机,输出功率186.5千瓦或以上,但不超过373千瓦,铸铁框架结构
8501.63.0000 AC generators, each having copper windings and weighing more than 900 kg but not more than 1700 kg 交流发电机,每个都有铜绕组,重量超过900公斤但不超过1700公斤
8501.64.0025 AC generators, of an output exceeding 750 kVA but not exceeding 10,000 kVA, each having copper windings and weighing more than 1650 kg but not more than 4100 kg, other than for wind-powered generating sets classified within 8502.31.00 输出功率超过750千伏安但不超过10000千伏安的交流发电机,每台发电机有铜绕组,重量超过1650公斤但不超过4100公斤,但风力发电机组除外,其分类在8502.31.00
8502.11.0000 Generator sets each weighing more than 650 kg but not over 830 kg 每台发电机组重量超过650kg但不超过830kg
8503.00.6500 Armatures, other than for motors of under 18.65 W, other than for generators for civil aircraft, each valued not over $5 电枢,不包括18.65瓦以下的电动机,不包括民用飞机发电机,每只电枢的价值不超过5美元
8503.00.6500 Motor field cores, other than for motors of under 18.65 W, other than for generators for civil aircraft, of steel stamping, each valued not over $5 电机磁芯,不包括18.65瓦以下的电机,不包括民用飞机发电机,钢制冲压件,每件价值不超过$5
8503.00.6500 Stators and rotors designed for use with household laundry washing machines or tabletop household appliances, each valued not over $10  与家用洗衣机或桌面家用电器配套使用的定子和转子,每台价值不超过10美元
8503.00.6500 Stators and rotors, 2 or 4 pole type, valued over $4,700 but not over $4,900 each 定子和转子,2极或4极型,价值超过4700美元,但不超过4900美元
8504.32.0000 Electrical transformers, each weighing not over 500 grams 变压器,每个重量不超过500
8504.90.6500 Printed circuit boards, each measuring no more than 2.3 cm by 13.1 cm, presented with two black plastic pin connectors on opposite ends and/or sides, designed for use in transformers used to provide power to telecommunications networks 印刷电路板,每块尺寸不超过2.3cm×13.1cm,两端和/或侧面有两个黑色塑料插针连接器,设计用于为电信网络供电的变压器
8504.90.7500 Dual layer printed circuit board assemblies, each valued over $30 but not over $35 双层印刷电路板组件,每块价值超过$30但不超过$35
8504.90.9646 Coils for cast epoxy resin transformers, each of the foregoing valued over $6,500 but not over $7,000 浇铸环氧树脂变压器线圈,每个线圈的价值超过6500美元,但不超过7000美元
8504.90.9690 Conductors of aluminum for electric transformers, static converters and inductors 用于电力变压器,静态变流器和电感器的铝导体
8504.90.9690 Heat sinks of aluminum for electric transformers, static converters and inductors 用于电力变压器,静态变流器和电感器的铝散热片
8504.90.9690 Inductor parts, of plastics 塑料的电感器部件
8504.90.9690 Toroids of silicon steel 硅钢环形
8506.50.0000 Lithium primary batteries valued over $0.50 but not over $0.75 each 锂原电池价值超过0.50美元但不超过0.75美元
8514.10.0000 Resistance-heated annealing ovens 电阻加热退火炉
8514.10.0000 Resistance-heated glass furnaces, each with continuous conveyance articulating roller and positive press 电阻加热的玻璃熔炉,每个都有连续的输送铰接辊和正压机
8514.40.0000 Resistance-heated strip casting furnaces 电阻加热带钢铸造炉
8515.11.0000 Manually operated soldering irons and guns, with or without their power supplies but without work stands or other accessory devices 手动操作的烙铁和枪,有或没有电源,但没有工作台或其他附件设备
8515.90.2000 Tungsten electrodes for tungsten inert gas arc welding torches 用于钨极惰性气体保护焊的钨电极
8525.60.1050 Transceivers, 10-meter, not hand-held, for operation in infrequencies of 28.000 to 29.700 MHz 收发器,10米,非手持式,可在28.00029.700 MHz的频率范围内工作
8526.91.0040 GPS apparatus measuring not over 118 mm in height, 120 mm in width and 20 mm in thickness, presented with or without attached antenna or other accessories GPS设备的高度不超过118毫米,宽度为120毫米,厚度为20毫米,带有或不带有天线或其他附件
8526.91.0040 GPS apparatus suitable for use with dog or other animal collars GPS装置适用于狗或其他动物项圈
8526.91.0040 Kits each consisting of GPS apparatus suitable for use with dog or animal collars, a hand-held GPS transmitter and accessories therefor 每个套件包括适用于狗或动物项圈的GPS装置,手持GPS发射器及其配件
8526.92.5000 Radio remote control apparatus of a kind suitable for controlling gas burning fireplaces 一种适用于控制燃气壁炉的无线电遥控装置
8529.10.4040 27 MHz radio remote control antennas each of a kind designed to transmit a signal to a dog collar receiver 27 MHz无线电遥控天线,每种都设计用于向狗项圈接收器发送信号
8529.10.9100 CB radio antennas CB无线电天线
8532.22.0055 Aluminum electrolytic capacitors each valued not over $1.50 铝电解电容器每个价值不超过1.50美元
8532.24.0020 Fixed ceramic dielectric multilayer chip capacitors, each valued not over $0.12 per unit 固定陶瓷电介质多层芯片电容器,每个单元的价值不超过0.12美元
8532.25.0010 Dielectric capacitors of paper or plastics, for AC service, operating at less than 300 V each valued not over $4.50 用于交流电的纸质或塑料电介质电容器,每个电压低于300 V,价值不超过4.50美元
8532.25.0020 Dielectric capacitors of paper or plastics, for AC service, operating at 300 V or more but not exceeding 600 V, each valued not over $3 用于交流电的纸或塑料电介质电容器,工作电压为300 V或以上但不超过600 V,每个电容器的价值不超过3美元
8532.25.0080 Double-sided capacitor modules, each containing capacitors operating at 165 farad, 48 V, and 53 watt-hours 双面电容器模块,每个电容器模块包含165法拉,48伏和53瓦时的电容器
8532.29.0040 Fixed capacitors (the foregoing other than tantalum, aluminum electrolytic, ceramic dielectric, dielectrics of paper or plastics or mica dielectric), each valued over $200 but not over $300 固定电容器(上述除钽,铝电解电容,陶瓷电介质,纸或塑料或云母电介质的电介质),每个价值超过200美元但不超过300美元
8532.30.0090 Variable capacitors (other than mica, ceramic or glass dielectric), each valued over $500 but not over $600 可变电容器(云母,陶瓷或玻璃电介质除外),每个价值超过500美元但不超过600美元
8533.40.4000 Metal oxide varistors of ceramic metal oxide materials 陶瓷金属氧化物材料的金属氧化物压敏电阻
8533.40.8070 Potentiometers (other than cermet or metal glaze), each valued not over $70 电位计(金属陶瓷或金属釉除外),每个价值不超过70美元
8533.40.8070 Thermistors (other than cermet or metal glaze), each valued not over $1 热敏电阻(金属陶瓷或金属釉除外),每个价值不超过1美元
8536.30.4000 Motor overload protectors for a voltage exceeding 60 V but not exceeding 1,000 V, each valued over $5 but not over $7 电机过载保护器,电压超过60 V但不超过1,000 V,每个价值超过5美元但不超过7美元
8536.49.0065 Contactors for a voltage not exceeding 1,000 V, each valued not over $18 接触器的电压不超过1,000 V,每个值不超过18美元
8536.50.4000 Motor starters for a voltage exceeding 60 V but not exceeding 1,000 V, valued over $9 but not over $10 each 电动机启动器的电压超过60 V但不超过1,000 V,价值超过9美元但不超过10美元
8536.50.9020 Rotary switch assemblies, for a voltage not exceeding 1,000 V, rated at not over 5 A, each valued over $2 but not over $3 旋转开关组件,电压不超过1,000 V,额定值不超过5 A,每个价值超过2美元但不超过3美元
8536.50.9040 Snap-action switches, for a voltage not exceeding 250 V, rated not over 8 A 快动开关,电压不超过250 V,额定值不超过8 A
8536.50.9055 Limit switches, for a voltage not exceeding 1,000 V, each valued over $19 but not over $32 限位开关,电压不超过1,000 V,每个价值超过19美元但不超过32美元
8536.50.9065 Broken belt switches, for a voltage not exceeding 1,000 V, designed for use in clothes dryers 断开的皮带开关,电压不超过1,000 V,设计用于干衣机
8536.50.9065 Modular light switches, for a voltage not exceeding 1,000 V, presented in polyethylene terephthalate (PET) housings, designed for use with a backplate 模块化灯开关,电压不超过1,000 V,采用聚对苯二甲酸乙二醇酯(PET)外壳,设计用于背板
8536.50.9065 Single-pole, double-throw switches, for a voltage not exceeding 100 V, each with a movable contact arm permitting the opening and closing of contact points 单刀双掷开关,电压不超过100 V,每个都带有可动接触臂,可以打开和关闭接触点
8536.50.9065 Switches designed for use in motor vehicles, driver or passenger activated 设计用于机动车辆,驾驶员或乘客的开关
8536.69.4010 Coaxial connectors, for a voltage not exceeding 1,000 V, valued over $0.20but not over $0.30 each 同轴连接器,电压不超过1,000 V,价值超过0.20美元,但每个不超过0.30美元
8536.69.4020 Cylindrical multicontact connectors, for a voltage not exceeding 1,000 V, each valued not over $120 圆柱形多触点连接器,电压不超过1,000 V,每个值不超过120美元
8536.69.4040 Printed circuit connectors each valued not over $1 印刷电路连接器每个价值不超过1美元
8536.69.4040 Printed circuit connectors, for a voltage not exceeding 1,000 V, measuring 142 mm long, 20.53 mm high and 6.5 mm wide 印刷电路连接器,电压不超过1,000 V,长142 mm,高20.53 mm,宽6.5 mm
8536.69.4040 Printed circuit connectors, for a voltage not exceeding 1,000 V, measuring 59.08 mm long, 25.91 mm high and 25.91 mm wide, each valued not over $20 印刷电路连接器,电压不超过1,000 V,长59.08 mm,高25.91 mm,宽25.91 mm,每个价值不超过20美元
8536.69.4040 Printed circuit connectors, for a voltage not exceeding 1,000 V, each valued over $1 but not over $5 印刷电路连接器,电压不超过1,000 V,每个价值超过1美元但不超过5美元
8536.69.4040 Printed circuit connectors, for a voltage not exceeding 1,000 V, stacked, each valued not over $10 印刷电路连接器,堆叠电压不超过1,000 V,每个价值不超过10美元
8536.90.4000 Butt splice connectors, for a voltage not exceeding 1,000 V, each valued not over $3 对接接头,电压不超过1,000 V,每个价值不超过3美元
8536.90.4000 Kits each containing 40 assorted terminals comprising 12 butt splices, 10 ring terminals, 8 spade terminals and 10 female disconnects, for a voltage not exceeding 1,000 V 每个套件包含40个各种端子,包括12个对接接头,10个环形端子,8个铲形端子和10个母接头,电压不超过1,000 V
8536.90.4000 Kits each containing 80 assorted terminals, valued not over $2, for a voltage not exceeding 1,000 V 每个包含80个各种终端的套件,价值不超过2美元,电压不超过1,000 V
8536.90.4000 Ring terminals, for a voltage not exceeding 1,000 V 环形端子,电压不超过1,000 V.
8536.90.4000 Twist-on wire connectors, for a voltage not exceeding 1,000 V, each valued not over $0.03 扭绞式电线连接器,电压不超过1,000 V,每个值不超过0.03美元
8536.90.8530 Junction boxes, each valued over $1.40 but not over $1.70 接线盒,每个价值超过1.40美元但不超过1.70美元
8541.21.0075 Transistors, with a dissipation rate of less than 1 W and an operating frequency of not less than 100 MHz, valued over $0.04 but not over $0.05 each 晶体管的耗散率小于1 W,工作频率不低于100 MHz,价值超过0.04美元但不超过0.05美元
8541.21.0095 Bipolar junction transistors, with a dissipation rate of less than 1 W and with an operating frequency of less than 100 MHz 双极结型晶体管,耗散率小于1 W,工作频率小于100 MHz
8541.29.0095 Metal-oxide transistors on a silicon-carbide substrate, with a dissipation rate of less than 1 W and an operating frequency of less than 100 MHz 碳化硅衬底上的金属氧化物晶体管,其耗散率小于1W,工作频率小于100MHz
8541.60.0060 Mounted quartz piezoelectric crystals operating at a supply voltage of 1.5 V or greater but not exceeding 3.75 V and a frequency range not over 175 MHz 安装的石英压电晶体,工作电源电压为1.5 V或更高但不超过3.75 V,频率范围不超过175 MHz
8543.10.0000 S-band and X-band linear accelerators designed for use in radiation surgery or radiation therapy equipment S波段和X波段线性加速器设计用于放射手术或放射治疗设备
8543.30.2000 Copper panel or pattern electroplating machines of a kind used solely or principally for the manufacture of printed circuits 铜板或图案电镀机,单独使用或主要用于制造印刷电路
8543.30.2000 Electrolysis copper etchback and desmear machines of a kind used solely or principally for the manufacture of printed circuits 电解铜回蚀和去污机,仅用于或主要用于制造印刷电路
8544.30.0000 Coaxial antenna feeder cables designed for use in motor vehicles 同轴天线馈电电缆设计用于机动车辆
8544.30.0000 Ignition coil and wiring sets designed for use with motor vehicle engines, each valued not over $7 设计用于机动车发动机的点火线圈和线束,每个价值不超过7美元
8544.30.0000 Power supply cables designed for use in aircraft 设计用于飞机的电源线
8544.30.0000 Wiring sets designed for use with motor vehicle gear shifters, each valued not over $7 设计用于机动车变速器的接线组,每个价值不超过7美元
8544.49.9000 Insulated aluminum cables, not fitted with connectors, for a voltage exceeding 80 V but not exceeding 600 V 绝缘铝电缆,未安装连接器,电压超过80 V但不超过600 V
8703.21.0110 Four-wheel off-road vehicles, with only spark-ignition internal combustion reciprocating piston engines, of a cylinder capacity not exceeding 1,000 cc, with straddle seat and handlebar control, each with label indicating that vehicle is for operation only by persons at least 16 years of age, each valued not over $5000 四轮越野车,只有火花点火式内燃往复式活塞发动机,气缸容量不超过1,000毫升,带有跨座和车把控制装置,每个都带有标签,表明车辆仅供至少16人使用 年龄,每个价值不超过5000美元
8709.11.0030 Works trucks, electrical, operator riding, each of a curb weight exceeding 8,500 kg but not exceeding 9,500 kg 工作卡车,电动,操作员骑行,每个重量超过8,500千克但不超过9,500千克
8803.30.0030 Gearhead assemblies, and parts thereof, for use in civil aircraft, each valued not over $40 用于民用飞机的减速机组件及其零件,每个价值不超过40美元
8803.90.9060 Wing, tail, fuselage and other body sections, including structural components and parts of the foregoing, designed for use on drone aircraft not capable of transporting persons 机翼,尾翼,机身和其他车身部分,包括上述结构部件和部件,设计用于无法运输人员的无人驾驶飞机
9002.90.9500 Motor vehicle lens cover assemblies 机动车镜头盖组件
9011.90.0000 Accessories designed for compound optical microscope stages 为复合光学显微镜平台设计的附件
9011.90.0000 Camera adapter mounts designed for compound optical microscopes 专为复合光学显微镜设计的相机适配器安装座
9011.90.0000 Episcopic fluorescence microscopy accessories designed for compound optical microscopes 用于复合光学显微镜的Episcopic荧光显微镜配件
9013.20.0000 Lasers, other than laser diodes, each valued over $200 but not over $300 激光二极管以外的激光器价值超过200美元但不超过300美元
9013.80.7000 Liquid-crystal displays, each measuring not over 85 cm in diagonal measurement 液晶显示器,每个测量对角线测量不超过85厘米
9014.80.2000 Depth-sounding apparatus, each valued not over $50 深度探测仪器,每个价值不超过50美元
9014.90.6000 Parts, of plastics, of fish finders of subheading 9014.80.20 塑料零件,副标题9014.80.20的鱼探仪
9018.11.9000 Disposable electrocardiograph (ECG) electrodes 一次性心电图(ECG)电极
9018.12.0000 Portable ultrasonic scanner consoles, each weighing less than 4 kg, presented with or without transducer 便携式超声波扫描仪控制台,每个重量不超过4千克,带或不带传感器
9018.19.9550 Digital peak flow meters suitable for use by medical professionals 适用于医疗专业人员的数字峰值流量计
9018.19.9550 Fingertip pulse oximeters suitable for use by medical professionals 指尖脉搏血氧仪适合医疗专业人员使用
9018.19.9560 Bismuth germanate crystals with set dimensional and surface finish requirements and used as a detection element in Positron Emission Tomography (PET) detectors 具有固定尺寸和表面光洁度要求的锗酸铋晶体,用作正电子发射断层扫描(PET)探测器中的检测元件
9018.19.9560 Magnetic resonance imaging ("MRI") patient enclosure devices, each incorporating radio frequency and gradient coils 磁共振成像(“MRI”)患者封闭装置,每个装置包括射频和梯度线圈
9018.19.9560 Parts and accessories of capnography monitors 二氧化碳监测仪的零件和配件
9018.90.2000 Otoscopes 耳镜
9018.90.3000 Anesthesia masks 麻醉面罩
9018.90.6000 Electrosurgical cautery pencils with electrical connectors 有电子连接器的Electrosurgical烧灼铅笔
9018.90.7580 Printed circuit board assemblies designed for use in displaying operational performance of medical infusion equipment 印刷电路板组件设计用于显示医用输液设备的操作性能
9022.90.2500 X-ray tables X射线表
9022.90.4000 X-ray tube housings and parts thereof X射线管外壳及其零件
9022.90.6000 Parts and accessories, of metal, for mobile X-ray apparatus 移动式X射线装置用金属零件和附件
9022.90.6000 Printed circuit board assemblies, of a kind designed for use in X-ray apparatus X射线设备用印刷电路板组件
9022.90.6000 Tungsten shielding, containing 90% or more of tungsten, of a kind designed to be attached to the walls of the multileaf collimator of the specific radiotherapy apparatus based on the use of X-rays 钨屏蔽,含有90%90%以上的钨,是一种根据X射线的使用而设计的附在特定放射治疗设备的多叶准直器壁上的屏蔽
9022.90.6000 Vertical stands specially designed to support, contain or adjust the movement of X-ray digital detectors, or the X-ray tube and collimator in complete X-ray diagnostic systems 专用于支撑、容纳或调节X射线数字探测器或完整X射线诊断系统中X射线管和准直器运动的垂直支架
9022.90.9500 Thermoplastic masks for radiation therapy, affixed to the treatment table when used, each valued over $18 but not over $23 放射治疗用热塑性口罩,使用时贴在治疗台上,每个口罩价值超过18美元,但不超过23美元
9026.10.2040 Electromagnetic flow meter systems for pipes with outside diameters larger than 183 cm 外径大于183cm的管道用电磁流量计系统
9026.20.4000 Digital tire pressure gauges, each valued not over $2 数字轮胎压力表,每个不超过2美元
9027.90.5910 Carbon monoxide sensors, each having a value exceeding $14 but not exceeding $19 一氧化碳传感器,每个传感器的价值超过14美元但不超过19美元
9027.90.5910 Hydrogen sulfide sensors, each having a value exceeding $9 but not exceeding $13 硫化氢传感器,每个传感器的价值超过$9但不超过$13
9027.90.5910 Nitrogen dioxide sensors, each having a value exceeding $12 but not exceeding $17 二氧化氮传感器,每个传感器的价值超过$12但不超过$17
9027.90.5910 Sulfur dioxide sensors, each having a value exceeding $24 but not exceeding $29 二氧化硫传感器,每个传感器的价值超过24美元但不超过29美元
9027.90.5995 Microtome universal cassette clamps 切片机通用卡带夹
9028.90.0040 Utility meter bases, of plastics, each 17 cm or greater but not exceeding 18 in diameter, incorporating a latching relay, the foregoing valued over $8 but not over $10 塑料电表底座,每根直径17厘米或以上,但不超过18厘米,包括一个闭锁继电器,上述价值超过8美元但不超过10美元
9030.40.0000 Waveform monitors, each valued over $4,000 but not over $5,000 波形监视器,每台价值超过4000美元但不超过5000美元
9030.90.2500 Printed circuit board assemblies designed for use with X-ray detectors X射线探测器用印刷电路板组件
9030.90.8911 Oscilloscope probes 示波器探头
9032.10.0030 Automatic thermostats for heating, ventilation and air conditioning systems, containing temperature and humidity sensors, designed for wall mounting 加热、通风和空调系统用自动恒温器,装有温度和湿度传感器,用于壁挂式安装
9032.10.0060 Thermostats for air conditioning, refrigeration or heating systems, designed for use in motor vehicles 汽车空调、制冷或加热系统用恒温器
9032.10.0060 Thermostats for air conditioning, refrigeration or heating systems, other than for wall mounting, each measuring not more than 15 cm in length, 11 cm in width, and 3 cm in height 空调、制冷或供暖系统用恒温器(壁装式除外),每个长度不超过15厘米,宽度不超过11厘米,高度不超过3厘米
9032.89.4000 Battery balancers designed for regulating voltage across batteries, other than for 6, 12 or 24 volt systems 用于调节蓄电池电压的蓄电池平衡器,61224伏系统除外
9032.89.6040 Water level and temperature control devices of a kind used in household appliances 家用电器用水位温控装置
9032.89.6060 Flow and liquid level control instruments, each valued not over $10 流量和液位控制仪表,每个价值不超过10美元
9032.89.6085 Printed circuit board assemblies designed to control the flow of paint in paint sprayers 印刷电路板组件,用于控制喷漆机中的油漆流动
9032.90.6120 Thermostat covers 恒温器盖
美国160亿美元关税加征清单排除产品目录
本表清单排除时效说明:除外责任将于2018823160亿美元加征生效之日起适用,并在本通知发布后延长一年
HTS US
商品编码
美国商品描述备注 商品描述(中文版,仅供参考)
3906.90.5000 Acrylic acid-2-acrylamido-2-methylpropanesulfonic acid-acrylic ester(AA/AMPS/HPA) terpolymers, presented in dry form 丙烯酸-2-丙烯酰胺基-2-甲基丙磺酸 - 丙烯酸酯(AA / AMPS / HPA)三元共聚物,以干燥形式存在
Copolymers of acrylic acid and 2-acrylamide-2-methylpropanesulfonic acid,valued at $5.40 to $5.60 per kg 丙烯酸和2-丙烯酰胺-2-甲基丙磺酸的共聚物,价格为每公斤5.40美元至5.60美元
3911.10.0000 Granular hydrocarbon resins, each pellet not larger than 1 cm in any dimension and having a melting point greater than 95 degrees C but not greater than 105 degrees C, presented in immediate packings of paper, paperboard or kraft paper weighing with their contents greater than 23 kg but not greater than 27 kg 颗粒状烃类树脂,每个颗粒在任何尺寸上不大于1厘米,熔点大于95摄氏度但不大于105摄氏度,立即包装纸,纸板或牛皮纸,其内容物大于23 kg但不大于27 kg
3916.20.0020 Profile shapes, of a kind used in producing door jambs, composed of a composite of polyvinyl chloride, calcium carbonate and sawdust 用于生产门侧柱的型材形状,由聚氯乙烯,碳酸钙和锯末的复合物组成
3917.23.0000 Hose of braided polyvinyl chloride, having crimped fittings, designed to carry water, valued not over $2.00 per kg 编织聚氯乙烯软管,具有压接配件,设计用于携带水,价值不超过每公斤2.00美元
3917.29.0090 Molded acrylonitrile-butadiene-styrene (ABS) tubes, of a kind used to effect the sterile transfer of fluid from a bag or vial to another container, each tube measuring 7.5 cm or more but not exceeding 23 cm in length, with an inner diameter of less than 0.65 cm and an outer diameter of less than 9 cm, one end having been angle-cut to form a spike, and having an integrated flange, less than 3 cm in diameter (splash guard) near the spike end and removable polyethylene caps on each end, put up in sterile packing 模制丙烯腈 - 丁二烯 - 苯乙烯(ABS)管,用于实现从袋或小瓶到另一个容器的无菌流体转移,每个管长7.5厘米或更长但不超过23厘米,内径 小于0.65厘米,外径小于9厘米,一端经过角切割以形成长钉,并且具有一个整体凸缘,直径小于3厘米(防溅罩)靠近长钉端和可拆卸聚乙烯 每端都有盖子,装在无菌包装中
Polymer strips curled in helical fashion to form a flexible tube having a constant circular cross-section with a diameter not exceeding 2 cm 聚合物条带以螺旋方式卷曲以形成具有恒定圆形横截面的柔性管,其直径不超过2cm
3917.32.0050 Drinking straws, of plastics, each straw 8 mm or more in outside diameter and 20 cm or more in length 吸管,塑料,每根吸管外径8毫米或以上,长度20厘米或以上
3917.40.0090 Bulkhead fittings, each comprising a hollow, threaded cylindrical body with a hexagonal or octagonal head on one end, of a length 9.53 cm or more but not exceeding 23.5 cm and having an inside diameter of 1.27 or more but not exceeding 15.24 cm, a polymer gasket and a hexagonal or octagonal tightening nut 隔板配件,每个包括一个中空的螺纹圆柱体,一端带六角形或八角形头,长度为9.53厘米或以上但不超过23.5厘米,内径为1.27或更大但不超过15.24厘米,聚合物 垫圈和六角形或八角形紧固螺母
Polyacetal brackets for connectors, of a length measuring 3.84 cm or more but not exceeding 4.57 cm, a width of 0.838 cm and a height of 2.15 cm 连接器用聚缩醛支架,长度为3.84厘米或以上但不超过4.57厘米,宽度为0.838厘米,高度为2.15厘米
Polyacetal filters measuring 3.76 cm x 3.76 cm x 0.31 cm 聚缩醛过滤器,尺寸为3.76厘米×3.76厘米×0.31厘米
Polyacetal hose barb fittings, with a length of 2.27 cm, width of 0.99 cm and height of 2.29 cm 聚缩醛软管倒钩配件,长2.27厘米,宽0.99厘米,高2.29厘米
Tube, pipe and hose couplings and connectors of plastics, with maximum outside dimensions of 6.5 cm by 6.35 cm by 6.35 cm 管,管和软管接头和塑料连接器,最大外部尺寸为6.5厘米×6.35厘米×6.35厘米
Y-shaped fittings of plastics, each measuring 6.99 cm in length and 3.18 cm or more but not exceeding 3.81 cm in width and height, incorporating a valve stem of plastics and brass in its center 塑料的Y形配件,每个长6.99厘米,宽3.18厘米,但宽度和高度不超过3.81厘米,中间装有塑料和黄铜阀杆
3919.10.2020 Electrical tape of polyvinyl chloride, in rolls, measuring not more than 2 cm in width, not more than 20.2 m in length, and not more than 0.18 mm in thickness 聚氯乙烯电子胶带,卷成宽度不超过2厘米,长度不超过20.2米,厚度不超过0.18毫米
3919.10.2030 Transparent tape of plastics with an acrylic emulsion adhesive, in rolls measuring not over 4.8 cm in width, valued not over $.25 per square meter 带有丙烯酸乳液粘合剂的透明塑料胶带,卷尺宽度不超过4.8厘米,价值不超过每平方米0.25美元
3919.10.2055 Rolls of polyethylene film coated with a solvent acrylic adhesive 涂有溶剂丙烯酸粘合剂的聚乙烯薄膜卷
3920.20.0055 Heat-sealable printed films, of plastics, having a thickness of more than 20 microns but not more than 30 microns, in rolls wider than 15 cm but not more than 20 cm 可热封的塑料印刷薄膜,厚度大于20微米但不大于30微米,卷宽大于15厘米但不大于20厘米
3920.43.5000 Rolls of polyvinyl chloride, measuring 2.5 cm or more but not exceeding 5.1 cm in width and 182.9 m in length 聚氯乙烯卷,宽2.5厘米或更宽,但宽度不超过5.1厘米,长度为182.9
Sheets of polyvinyl chloride, in rolls measuring 1.5 m or more in width, printed in various colors, valued at $1.60 to $1.90 per kg 聚氯乙烯薄片,卷宽1.5米或以上,印刷各种颜色,价格为每公斤1.601.90美元
Sheets of polyvinyl chloride, measuring 2.44 mm or more but not exceeding 3.66 m in width, 3.05 or more but not exceeding 5.18 m in length and 0.5 cm in thickness 聚氯乙烯片材,宽度2.44毫米或以上但宽度不超过3.66米,长度3.05或以上但不超过5.18米,厚度0.5厘米
Sheets of polyvinyl chloride, measuring 47.5 cm in width, 61.0 cm in length and 24 mm in thickness, coated on both sides with a printable primer 聚氯乙烯片材,宽47.5厘米,长61.0厘米,厚24毫米,两面涂有可印刷底漆
Sheets of transparent (double polished or super double polished) polyvinyl chloride, whether or not with an integrated pattern, in rolls, measuring 1.37 m or more but not exceeding 1.83 m in width, not more than 54.9 m in length, and 0.075 mm or more but not exceeding 0.51 mm in thickness, valued at $2.35 or more but not exceeding $3.35 per square meter 透明(双抛光或超双抛光)聚氯乙烯片材,无论是否具有整体图案,均为卷状,宽度为1.37米或更长但不超过1.83米,长度不超过54.9米,或0.075毫米或 厚度不超过0.51毫米,价值2.35美元或以上但不超过每平方米3.35美元
3920.49.0000 Uncoated polyvinyl chloride (PVC) film, containing by weight less than 6% of plasticizers, less than 0.07 mm in thickness, in rolls weighing 1 t or more 无涂层聚氯乙烯(PVC)薄膜,含重量小于6%的增塑剂,厚度小于0.07毫米,卷重1吨或以上
3920.62.0090 Films coated on one or both sides with polyvinylidene chloride (PVdC) or polyvinyl alcohol (PVOH), whether or not having a primer layer between the base and coating; any of the foregoing having a total thickness greater than
0.01 mm but not greater than 0.03 mm
在一面或两面涂有聚偏二氯乙烯(PVdC)或聚乙烯醇(PVOH)的薄膜,无论底漆和涂层之间是否有底漆层; 任何前述的总厚度大于0.01mm但不大于0.03mm
3920.99.2000 Sheets of transparent polyurethane, measuring 112 cm in width and 112 cm or more but not exceeding 168 cm in length, whether or not put up in sterile packaging 无论是否装在无菌包装中,透明聚氨酯板材,宽112厘米,长112厘米或不超过168厘米
3921.12.1100 Printed film of polyvinyl chloride, laminated with foamed-polyvinyl chloridecoated polyester scrim, in rolls, of a kind used for lining shelves or drawers 聚氯乙烯印刷薄膜,层压有泡沫聚氯乙烯涂层的聚酯稀松布,卷状,用于衬里搁板或抽屉
Three-ply polyvinyl chloride film laminated with nonwoven polyester scrim, in rolls, measuring not more than 5 m in width and not more than 91.5 m in length, valued at $2.10 or more but not exceeding $2.40 per square meter 三层聚氯乙烯薄膜,层压有非织造聚酯稀松布,成卷,宽度不超过5米,长度不超过91.5米,价值2.10美元或以上但不超过每平方米2.40美元
3921.12.5000 Sheets of foamed polyvinyl chloride combined with a non-textile moisture barrier, in rolls, measuring 45.7 cm in width and 1.83 m in length, each roll weighing not more than 0.39 kg 发泡聚氯乙烯片材与非织物防潮层相结合,成卷为45.7厘米宽,长1.83米,每卷重量不超过0.39千克
3921.13.1500 Synthetic leather sheeting, comprising three layers of polycarbonate-type polyurethane, the outer layer surface treated, the middle layer of foamed polyurethane, and the bottom adhesive layer combined with a support layer of polyester knit fabric, weighing 441 g or more but not exceeding 539 g per square meter, in rolls, measuring 1.4 m or more but not exceeding 1.5 m in width and 20 m or more in length 合成皮革薄片,包括三层聚碳酸酯型聚氨酯,外层表面处理,泡沫聚氨酯中间层,底部粘合剂层与聚酯针织物支撑层相结合,重量441克或以上但不超过539 每平方米g,以卷为单位,宽度为1.4米或更长但宽度不超过1.5米,长度为20米或更长
3921.14.0000 Cellular regenerated cellulose plates (blocks), measuring 99.1 cm by 99.1 cm by 35.6 cm 细胞再生纤维素板(块),尺寸为99.1厘米×99.1厘米×35.6厘米
3921.19.0000 Non-adhesive translucent ethylene-vinyl acetate, in sheets or rolls, of a kind used for shelf liners 用于货架衬里的非粘性半透明乙烯 - 乙酸乙烯酯,片状或卷状
Plates composed of layers of closed-cell ethylene-vinyl acetate and polyethylene foam, in rectangular shapes, each having a surface area of 2 m² or more but not greater than 2.25 m² 由闭孔乙烯 - 醋酸乙烯酯和聚乙烯泡沫层组成的板,呈矩形,每个表面积为2m²或更大但不大于2.25m²
Sheets and strips consisting of both cross-linked polyethylene and ethylene vinyl acetate, of a width greater than 1 m but not greater than 1.5 m, and a length greater than 1.75 m but not greater than 2.6 m 由交联聚乙烯和乙烯醋酸乙烯酯组成的片材和条带,宽度大于1米但不大于1.5米,长度大于1.75米但不大于2.6
3921.90.1100 Sheets of noncellular polyvinyl chloride combined with man-made textile fabric, valued at $6.15 or more but not exceeding $6.30 per square meter 非细胞聚氯乙烯片与人造纺织面料相结合,价值6.15美元或以上但不超过每平方米6.30美元
3921.90.1500 Polyethylene sheet and film laminated with spunbond-spunbond-spunbond nonwoven polypropylene fabric, measuring 1.12 cm or more but not exceeding 1.52 cm in width and 1.93 cm or more but not exceeding 2.29 cm in length, and weighing 55 g/m2 or more but not exceeding 88 g/m2 用纺粘 - 纺粘 - 纺粘非织造聚丙烯织物层压的聚乙烯薄膜和薄膜,宽1.12厘米但不超过1.52厘米,长1.93厘米或不超过2.29厘米,重量不超过55/平方米但不包括 超过88/平方米
3921.90.1950 Plastics sheeting made up of plain-woven, high-density polyethylene fabric coated on both sides with low-density polyethylene, in rolls measuring 5 m in width 塑料薄膜由普通编织的高密度聚乙烯织物制成,两面均涂有低密度聚乙烯,卷宽5
3921.90.4090 Sheets of transparent (double polished or super double polished) laminated polyvinyl chloride, whether or not with an integrated pattern, in rolls, measuring 1.37 m or more but not exceeding 1.83 m in width, not more than 54.9 m in length, and 0.075 mm or more but not exceeding 0.51 mm in thickness, valued at $2.35 or more but not exceeding $3.35 per square meter 透明(双抛光或超双抛光)层压聚氯乙烯片材,无论是否具有整体图案,均为卷状,宽度为1.37米或更长但不超过1.83米,长度不超过54.9米,0.075毫米 厚度不超过0.51毫米,价值2.35美元或以上但不超过每平方米3.35美元
Sheets of transparent (double polished or super double polished) polyvinyl chloride, whether or not with an integrated pattern, in rolls, measuring 1.37 m but not exceeding 1.83 m in width, not more than 54.9 m in length, and 0.075 mm but not exceeding 0.51 mm in thickness, valued at $2.35 or more but not exceeding $3.35 per square meter 透明(双抛光或超双抛光)聚氯乙烯片,无论是否带有整体图案,成卷,宽1.37米但宽不超过1.83米,长度不超过54.9米,0.075毫米但不超过 厚度0.51毫米,价值2.35美元或以上,但每平方米不超过3.35美元
7308.90.3000 Girders of iron or steel, meeting ASTM standard A572, Grades 50, 65 or 70 铁或钢梁,符合ASTM标准A572,等级50,6570
Pipes of iron or steel, with connectors, meeting ASTM standard A572, Grade 50 带连接器的铁或钢管,符合ASTM标准A572,50
Posts of steel pipe and tube, with ball knobs attached 钢管和钢管的柱子,附有球形旋钮
Posts of steel pipe and tube, with sill plates and ball studs attached 钢管和钢管柱,附有门槛板和球头螺栓
Rib nodes of iron or steel, meeting ASTM standard A572, Grades 50, 65 or 70 铁或钢的罗纹节点,符合ASTM标准A572,等级50,6570
Steel upstand support members 钢制立柱支撑构件
7308.90.9590 Angle feed racks of galvanized steel, designed for use in the feeding of livestock 镀锌钢角架,设计用于牲畜饲养
Animal kennels of iron or steel 动物狗窝铁或钢
Balusters or spindles, of iron or steel, designed for use in handrails 设计用于扶手的铁或钢的栏杆或锭子
Chain link fence panels, and fence panel stands and bases, of iron or steel 链条围栏板,围栏板架和铁或钢基座
Elongated half loops of galvanized steel 细长半圈镀锌钢
Gazebos, pergolas and trellises of iron or steel 凉亭,藤架和铁或钢架
Lockup frames of galvanized steel, of a length exceeding 3.0 m, designed for use in controlling the movement of livestock 镀锌钢锁定框架,长度超过3.0米,设计用于控制牲畜的移动
Steel plate assemblies conforming to ASTM A709 Grade 50 钢板组件符合ASTM A709 Grade 50标准
Tubes of galvanized steel, coped (notched) on one end, of a length not exceeding 1.0 m 镀锌钢管,一端加工(缺口),长度不超过1.0
7610.90.0080 Structural angles of aluminum, in a V shape with a 90 degree angle, for sliding or rolling driveway gates, in packages containing 2 or 3 angles, with each piece of a length exceeding 1.5 m but not exceeding 2.0 m and a width exceeding 4 cm but not exceeding 8 cm 铝制结构角度,呈90度角V形,用于滑动或滚动车道闸门,包含23个角度的包装,每件长度超过1.5米但不超过2.0米,宽度超过4厘米 但不超过8厘米
8407.90.1010 Spark-ignition reciprocating or rotary internal combustion piston engines, to be installed in agricultural or horticultural machinery or equipment, each rated at less than 4,200 W 火花点火往复式或旋转式内燃活塞发动机,安装在农业或园艺机械或设备中,每个额定功率低于4,200 W
8407.90.9060 Spark-ignition reciprocating or rotary internal combustion piston engines, not elsewhere specified or included, each rated at 4,476 W or more but not exceeding 18.65 kW, with an engine displacement of not more than 690 cc 火花点火往复式或旋转式内燃活塞发动机,未在其他地方指定或包括在内,每个额定功率为4,476 W或更高但不超过18.65 kW,发动机排量不超过690 cc
8419.89.9540 Cold plates for preparing tissue samples 用于制备组织样品的冷板
Quenching devices designed to lower the temperature of steel plate using water, each consisting of top cooling headers, bottom cooling headers, a side sweep header, a common control manifold that feeds all the headers, a main supporting frame to support all bottom headers and bottom rolls, a top header supporting sub-frame to support the top headers and top rolls, five top and five bottom rolls, neck bearings, drives and on board piping 淬火装置设计用于降低使用水的钢板温度,每个装置包括顶部冷却集管,底部冷却集管,侧扫头,一个供给所有集管的公共控制歧管,一个支撑所有底部集管和底部的主支撑框架 卷筒,顶部支架支撑子框架,支撑顶部集管和顶部辊子,五个顶部和五个底部辊子,颈部轴承,驱动器和板上管道
8419.89.9585 Cold plate machines, each incorporating a flat heat-absorbing metal plate capable of lowering the temperature of paraffin from a liquid to a solid phase,designed for use with microtomes 冷板机,每个都包含一个平板吸热金属板,能够将石蜡的温度从液体降低到固相,设计用于切片机
8432.29.0060 Walk behind rotary tillers, electrically powered, each weighing less than 16 kg 电动旋耕机,每个重量小于16kg
8432.29.0090 Scarifiers 松土机
8464.10.0100 Tile saws 瓷砖锯
8466.30.8000 Band saw guards 带锯守卫
Grinder stands, pedestal rollers and other tool and workpiece stands, supports and platforms 磨床支架,底座滚轮和其他工具和工件支架,支架和平台
Power tool mounts 电动工具安装座
8475.29.0000 Machines for manufacturing laminated or insulated glass, each machine valued over $100,000 用于制造层压或隔热玻璃的机器,每台机器价值超过100,000美元
8483.30.8090 Plain shaft bearings and bushings, without housings, each valued not over $3 不带轴承座的普通轴轴承和轴套,每件价值不超过3美元
8486.90.0000 Parts and accessories, not elsewhere specified or included, each valued not over $2800 零件和配件,未在其他地方指定或包括在内,每件价值不超过2800美元
8501.10.6040 Brushless DC motors, rated at 24V, designed for use in saltwater aquariums 无刷直流电机,额定电压为24V,专为海水水族箱设计
8501.32.2000 DC motors, each of an output exceeding 25 W but not exceeding 2.0 kW 直流电动机,每个输出功率超过25 W但不超过2.0 kW
DC motors, each of an output not exceeding 25 W 直流电机,每个输出功率不超过25 W
DC motors, of an output exceeding 750 W but not exceeding 14.92 kW, each with attached actuators, crankshafts or gears 直流电动机,输出功率超过750 W但不超过14.92 kW,每个都带有连接的执行器,曲轴或齿轮
8503.00.9550 Parts of generators (other than parts of general use as defined in note 2 to section XV), each valued not over $10 发电机的部件(第15节注释2中定义的一般用途部件除外),每个价值不超过10美元
8536.50.7000 Electronic AC lighting control switches, for dimming and turning lights on and off, packaged for retail sale 电子交流照明控制开关,用于打开和关闭调光和转向灯,零售包装
8541.10.0080 Surface-mount glass passivated rectifiers with a rectified output current not exceeding 1.25 A 表面贴装玻璃钝化整流器,整流输出电流不超过1.25 A
Surface-mount transient voltage suppressors having a peak pulse power capacity not exceeding 5 A 表面贴装瞬态电压抑制器,峰值脉冲功率容量不超过5A
Zener diodes having an admissible zener current of not more than 0.15 A at 25 degrees C 齐纳二极管在25℃下具有不大于0.15A的允许齐纳电流
8541.40.6015 Crystalline silicon photovoltaic cells of a kind described in statistical note 11 to chapter 85, made up into panels with a surface area not exceeding 3,061 cm2 统计说明1185章中描述的一种晶体硅光伏电池,制成表面积不超过3061平方厘米的面板
Solar panels, each of a surface area not exceeding 3,100 cm2 (described in statistical reporting number 8541.40.6015 and 8541.40.6035) 太阳能电池板,每个表面积不超过3100平方厘米(统计报告编号8541.40.60158541.40.6035
8541.40.6035 Solar panels, each of a surface area not exceeding 3,100 cm2 (described in statistical reporting number 8541.40.6015 and 8541.40.6035) 太阳能电池板,每个表面积不超过3100平方厘米(统计报告编号8541.40.60158541.40.6035
8544.49.2000 16-gauge 2-conductor wire, not fitted with connectors, for a voltage not exceeding 80 V 16规格2芯导线,未安装连接器,电压不超过80V
Electric conductors, not fitted with connectors, for a voltage not exceeding 80 V, each overmolded with polypropylene 电导体,未安装连接器,电压不超过80 V,每个都用聚丙烯包覆成型
8544.60.6000 Monopolar conductors for a voltage exceeding 1,000 V, other than of copper and not fitted with connectors 单极导体,电压超过1000 V,铜线以外,未安装连接器
8607.19.3010 Truck bolsters for railway cars, each weighing more than 650 kg 用于铁路车辆的卡车支架,每个重量超过650千克
8607.19.3020 Truck side frames for railway cars, each weighing more than 400 kg 用于铁路车辆的卡车侧架,每个重量超过400千克
8711.60.0090 Motorcycles with electric power for propulsion, each of a power not exceeding 1,000 W (described in statistical reporting numbers 8711.60.0050 or 8711.60.0090) 带推进功率的摩托车,每个功率不超过1000 W(在统计报告编号8711.60.00508711.60.0090中有描述)
8711.60.0050 Motorcycles with electric power for propulsion, each of a power not exceeding 1,000 W (described in statistical reporting numbers 8711.60.0050 or 8711.60.0090) 带推进功率的摩托车,每个功率不超过1000 W(在统计报告编号8711.60.00508711.60.0090中有描述)
Skateboards with electric power for propulsion, of a power not exceeding 250
W
用于推进电力的滑板,功率不超过250W
8713.90.0030 Three-wheeled carriages for disabled persons, with electric power for propulsion, each carriage having a second passenger seat capable of being stowed and a foot-operated brake 用于残疾人的三轮车厢,具有用于推进的电力,每个车厢具有能够被收起的第二乘客座椅和脚踏制动器
9025.19.8080 Thermometers comprising cable assemblies with sensors, suitable for use in swimming pools, not combined with other instruments, valued not over $10 each 温度计包括带传感器的电缆组件,适用于游泳池,不与其他仪器结合使用,每个价值不超过10美元
美国2000亿美元关税加征清单排除产品目录
本表清单排除时效说明:除外责任将于20189242000亿美元加征生效之日起适用,至202087日东部夏时制时间晚上11:59之前
HTS US
商品编码
美国商品描述备注 商品描述(中文版,仅供参考)
3824.99.3900 Chabazite zeolites having a silica-alumina ratio of 20:1 to 24:1, valued at $31 to $39 per kg 二氧化硅 - 氧化铝比为201241的菱沸石沸石,价格为每公斤3139美元
3923.90.0080 Cups of polypropylene, with a fluted wood paper filter fitted and affixed to the inside, measuring 44.1 mm in height, of a kind used to produce capsules for single-cup coffee brewing systems 聚丙烯杯,带有凹槽木纸过滤器,内部安装,尺寸为44.1毫米,用于生产单杯咖啡冲泡系统的胶囊
4016.91.0000 Anti-electrostatic discharge mats, comprising a conductive rubber mat measuring 40 cm or more but not exceeding 60 cm in width, 80 or more but not exceeding 125 cm in length, and 2 mm in thickness, with integrated
discharge points for a grounding wire clip or an anti-static wrist strap, such mats printed on the surface with measuring rules and technical reference data
防静电放电垫,包括40厘米或以上但宽度不超过60厘米,长度不超过或不超过125厘米,厚度为2毫米的导电橡胶垫,带有用于接地线夹的集成放电点 或者是防静电腕带,这种垫子在表面印有测量规则和技术参考数据
4016.93.1010 O-rings, of nitrile rubber, ethylene propylene diene monomer (EPDM) rubber or fluoroelastomers O形圈,丁腈橡胶,乙烯丙烯二烯单体(EPDM)橡胶或含氟弹性体
4201.00.3000 Dog harnesses and retractable dog leashes 狗用安全带和可伸缩的狗带
4402.10.0000 Portable, single-use grills for heating food, each comprising bamboo charcoal fuel, expanded perlite insulation, bamboo rods for suspending foods over the charcoal flame, and cut paper or paperboard in shapes specially designed for assembly of a grill body 用于加热食物的便携式一次性烤架,每个烤架包括竹炭燃料,膨胀珍珠岩保温材料,用于将食物悬挂在木炭火焰上的竹杆,以及专门用于组装烤架体的形状的切纸或纸板
4412.99.5105 Laminated wood flooring panels having a hardwood veneer finished surface and a backing of pine strips or blocks, the panels having tongue-and-groove outer edges and being in thickness greater than 1.4 cm but not greater than 1.5cm 层压木地板镶板,具有硬木饰面表面和松木条或块的背衬,镶板具有榫槽外边缘,厚度大于1.4厘米但不大于1.5厘米
4601.93.0100 Rattan webbing, woven into decorative patterns 藤编织带,编织成装饰图案
4823.70.0040 Paper pulp sponge blocks, measuring 38 cm by 38 cm by 102 cm (15 inches by 15 inches by 40 inches) 纸浆海绵块,尺寸为38厘米×38厘米×102厘米(15英寸×15英寸×40英寸)
5407.10.0010 Woven microfiber fabric of 100 percent polyester, not exceeding 150/75 or 104/72 threads per inch, weighing 83 gram/m2 100%聚酯纤维超细纤维织物,每英寸不超过150/75104/72螺纹,重83/平方米
5513.11.0040 Woven fabric sheeting of 65 percent polyester and 35 percent cotton,weighing less than 170g/ m2, not exceeding 45/45 or 110/76 threads per inch 65%聚酯和35%棉的机织布,重量小于170/平方米,不超过45/45或每英寸110/76螺纹
5903.20.2500 Polyester or viscose fabric coated with polyurethane, the foregoing measuring 137 cm (54 inches) in width, and weighing 187 grams/m2 涂有聚氨酯的聚酯或粘胶织物,上述宽度为137厘米(54英寸),重187/平方米
7314.14.1000 Stainless steel mesh filters 不锈钢网过滤器
7321.90.6090 Grills composed of steel wire, each measuring 49 cm by 47 cm (19.25 inches by 18.5 inches), weighing 0.36 kg (0.80 lbs.), designed as cooking surface of barbecue grill 由钢丝组成的烤架,每个尺寸为49厘米×47厘米(19.25英寸×18.5英寸),重0.36千克(0.80磅),设计为烧烤架的烹饪表面
7616.99.5190 Mounting boards of aluminum for guitar sound modifying (“effect”) devices,each consisting of an aluminum frame with above ground slots for the placement of devices and floor level slots for the on/off foot-operated pedal switches which control the modifying devices 用于吉他声音修改(效果)装置的铝制安装板,每个装置包括具有用于放置装置的地上槽的铝框架和用于控制修改装置的开/关脚踏开关的地板水平槽。
8302.41.6080 Hand rails of tubular stainless steel, with wall connectors, of a length exceeding 300 mm but not exceeding 1.3 m 带有壁式连接器的管状不锈钢扶手,长度超过300毫米但不超过1.3
8302.49.6085 Stamped and formed latches of steel 冲压成型的钢制闩锁
8302.50.0000 Stamped and formed brackets of steel 冲压成型钢支架
8407.32.9040 Spark ignition reciprocating piston engines of a cylinder capacity exceeding 100 cc but not exceeding 250 cc, not exceeding 10.0 kW 气缸容量超过100cc但不超过250cc,不超过10.0kW的火花点火往复式活塞发动机
8413.30.9030 Fuel pumps for internal combustion, spark ignition piston engines 用于内燃,火花点火活塞发动机的燃油泵
8414.90.1080 Parts, of aluminum, iron or steel, for blowers other than fans of 8414.51 铝,铁或钢的零件,用于除风扇8414.51以外的鼓风机
8471.60.9050 Mouse input devices for automatic data processing (ADP) machines, each valued over $70 用于自动数据处理(ADP)机器的鼠标输入设备,每个价值超过70美元
Trackpad input units for automatic data processing (ADP) machines, each valued over $100 用于自动数据处理(ADP)机器的触控板输入单元,每个价值超过100美元
8473.30.1180 Printed circuit assemblies to enhance the graphics performance of automatic data processing (ADP) machines (“accelerator modules”) 印刷电路组件,以提高自动数据处理(ADP)机器(加速器模块)的图形性能
Printed circuit assemblies for rendering images onto computer screens(“graphics processing modules”) 用于将图像渲染到计算机屏幕上的印刷电路组件(图形处理模块
Printed circuit assemblies, constituting unfinished logic boards 印刷电路组件,构成未完成的逻辑板
8473.30.5100 Parts and accessories of machines of heading 8471 not incorporating goods of headings 8541 or 8542 标题8471的机器的零件和附件,不包括标题85418542的货物
8476.81.0000 Refrigerated and heated vending machines for dispensing live bait and fishing tackle, each machine weighing more than 350 kg 冷藏和加热自动售货机,用于分配活饵和渔具,每台机器重量超过350公斤
8504.40.6018 Power supplies suitable for physical incorporation into automatic data processing (ADP) machines or units thereof of heading 8471, each with a power output exceeding 500 W, measuring 148mm in length, 43 mm in width and 335 mm in height 适用于物理结合到标题8471的自动数据处理(ADP)机器或其单元的电源,每个电源输出功率超过500 W,长148 mm,宽43 mm,高335 mm
8539.39.9000 Cold cathode electric neon discharge lamps, measuring 6.5 mm (1/4 inch) or less in diameter and 16 mm (5/8 inch ) or less in length 冷阴极电子氖放电灯,直径6.5毫米(1/4英寸)或更短,长度不超过16毫米(5/8英寸)
8708.30.5090 Guide pins and guide bolts designed for use in brakes and servo-brakes of subheading 8708.30 设计用于8708.30副标题的制动器和伺服制动器的导销和导向螺栓
8708.91.5000 Aluminum radiators for motor vehicles of headings 8701 to 8705 (other than for tractors suitable for agricultural use), measuring 50 cm or more but not exceeding 77 cm (20 inches to 30 inches) in width, 50 cm or more but not exceeding 77 cm (20 inches to 30 inches) in height, and 5 cm or more but not exceeding 11 cm (2 inches to 4 inches) in thickness, consisting of upper and lower tanks or side tanks welded to a center core 标题为87018705的汽车用铝制散热器(适用于农业用途的拖拉机除外),宽度为50厘米或以上但不超过77厘米(20英寸至30英寸),50厘米或以上但不超过77厘米 20英寸至30英寸)高,5厘米或更多但不超过11厘米(2英寸至4英寸)的厚度,由上下罐或焊接在中心芯上的侧罐组成
8712.00.2500 Single-speed bicycles having both wheels exceeding 63.5 cm in diameter,weighing less than 16.3 kg without accessories and not designed for use with tires having a cross-sectional diameter exceeding 4.13 cm 单速自行车,两个轮子直径超过63.5厘米,重量不到16.3千克,没有配件,不适用于横截面直径超过4.13厘米的轮胎
8716.90.5060 Tractor trailer skirts, consisting of panels designed to be attached to each side of a trailer, each with an upper section having a polyethylene core, steel layer and polyester finish coat and each lower section composed of thermoplastic vulcanite compound 拖拉机拖车裙边,由设计成连接到拖车每侧的面板组成,每个都具有上部,该上部具有聚乙烯芯,钢层和聚酯面漆,每个下部由热塑性硫化物复合物构成
9405.30.0010 Miniature lighting sets of a kind used for Christmas trees 用于圣诞树的微型照明设备
9405.40.8440 LED light fixtures, of a kind used in horticulture, containing over 5,000 LEDs spread across 6 light bars LED灯具,用于园艺,包含超过5000LED,分布在6个灯条上
9405.50.4000 Garden, patio and table top wick burning torches for outdoor use 室外用花园、露台和桌面灯芯火把
9405.99.4090 Lamp shades of fabric over metal frame 金属框架上织物灯罩
;
Copyright © 2009-2016 Mintfirst All Rights Reserved.   021-56501185 投诉电话 021-36362301 mint@mintfirst.com
Mint Transport Co.,Ltd. 沪ICP备14028382号   上海市虹口区四川北路1318号盛邦国际大厦29楼 021-31579040